F-Body Europe
http://forum.fbodyeurope.org/phpBB3/

I think we found a dyno
http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=1766		 Page 1 of 1
Author:  Hawk [ Thu Apr 18, 2002 2:12 pm ]
Post subject:  I think we found a dyno
In Weiden 30 euro a pull. No air fuel monitering equipment. Gives KW and PS but it sounds fun. If we get a large enough interest he would reduce the price.
Author:  Garry [ Thu Apr 18, 2002 2:44 pm ]
Post subject: 
Quote:
In Weiden 30 euro a pull. No air fuel monitering equipment. Gives KW and PS but it sounds fun. If we get a large enough interest he would reduce the price.

Please wait till I got the '79 running ... :)
Author:  Roy [ Thu Apr 18, 2002 5:58 pm ]
Post subject: 
Bruce
Damn that is a long haul!!!!!!!
What type of dyno is it?
The last one I was on in Mainz could handle the horsepower but the rollers couldnot handle the speed .So I could only go up to 5000 rpm in 4th. It still pulled 288 PS at the wheels though.
Author:  Garry [ Thu Apr 18, 2002 6:04 pm ]
Post subject: 
Quote:
The last one I was on in Mainz could handle the horsepower but the rollers couldnot handle the speed .So I could only go up to 5000 rpm in 4th.

Roy, what are you doing to them poor people :) Pulling up with a car strong enough to mess up their machine ... ;)
Author:  Jr [ Thu Apr 18, 2002 6:15 pm ]
Post subject: 
Where is this place?
Author:  Krazy [ Fri Apr 19, 2002 7:42 am ]
Post subject: 
There is a new one here in Witletch(sp?) I heard it is around 50 euro a pull. The guy is suppose to be cool and all of the equipment is suppose to be brand new. I was going to suggest it once I found out some more info.
Author:  BenZ28 [ Fri Apr 19, 2002 10:18 am ]
Post subject: 
Quote:
The last one I was on in Mainz could handle the

Roy, where in Mainz is it? Like to "test" my car there also...

Ben
Author:  Roy [ Fri Apr 19, 2002 12:28 pm ]
Post subject: 
Ben
It is up on the hill by the Mainz Volks Park , As you pass the park take a right at the next light go upthe road and you wiil see a Bosch Dienst on the right . That is the place.
But you can't do a full pull on dyno, it is speed limited to 180 kps. You would need to 4.11 gears for a full pull to 6200 rpms. with stock gears you will only go to 5200 rpm.

This is based on 6 speed tranny in 4th gear and 3.42 axle ratio.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/