| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Hey Ryan!!! http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=290 |
Page 1 of 1 |
| Author: | fbody97 [ Thu Jun 28, 2001 9:54 pm ] |
| Post subject: | Hey Ryan!!! |
Hey dude, what's up on the cam? Just curious. Would like to go ahead and order it. |
|
| Author: | guerardsgt [ Thu Jun 28, 2001 10:56 pm ] |
| Post subject: | hey |
I have'nt had a chance yet to call Comp Cams for your cam pricing. Your best bet would be for you to call up comp and tell them what you want to do. Have you decided yet on weather or not your going to replace the heads. If you are there isn't really any point in ordering the kit. If your not going to replace the heads than go ahead and get the kit with the cam,rockers,springs and lifters. Also remember to tell them you need a gasket kit with that. If your going to do this do it for the cheapest price but best quality. Before I forget when you call them ask them if the cam comes degreed, if it doesn't you need to get a degree wheel, since at this time I don't have one. The degree kit is about $70.00 and after I use it on your car I'll buy the degree kit from you since you won't need it. I know some of there cams come pre degreed so you don't have to mess with the degree wheel. To get this cam call around to find the best price. Although I'm pretty sure going directly through comp will probably be the cheapest. If you need help call me tommorow on the 29th after 6pm and we can discuss exactly what you want to do, to give you the best route. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|