DOES ANYONE HAVE THESE ANYWHERE IN GERMANY??? I really need a couple, but I can't seem to locate them to save my life..
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Deep 12 point metric sockets?? http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=3415 |
Page 1 of 2 |
| Author: | JackZ28 [ Tue Jul 08, 2003 8:22 pm ] |
| Post subject: | Deep 12 point metric sockets?? |
DOES ANYONE HAVE THESE ANYWHERE IN GERMANY??? I really need a couple, but I can't seem to locate them to save my life..
|
|
| Author: | Garry [ Tue Jul 08, 2003 8:32 pm ] |
| Post subject: | |
Hm ... what places did you check at? How deep do they need to be, what sizes do you need? |
|
| Author: | JackZ28 [ Tue Jul 08, 2003 8:40 pm ] |
| Post subject: | |
I need at least a 14mm.. I don't know that they come in multiple depths, but I guess it should be about 2 inches.. I think I also need a 9mm.... I checked the Praktiker, the local auto parts store and the BX.. I will check a couple more places on the economy tomorrow. Thanks Garry |
|
| Author: | Garry [ Tue Jul 08, 2003 10:07 pm ] |
| Post subject: | |
JackZ28 wrote: I need at least a 14mm.. I don't know that they come in multiple depths, but I guess it should be about 2 inches.. I think I also need a 9mm....
So, a 14 and a 9, 2 inch long... there's a couple places around Fulda that have tools ... I recon they carry them ... I'll check into it if I can get around to it ... |
|
| Author: | Hawk [ Wed Jul 09, 2003 7:36 am ] |
| Post subject: | |
We have all kind of tools in the toyland, garden store, and car care center. |
|
| Author: | Garry [ Wed Jul 09, 2003 7:49 am ] |
| Post subject: | |
P.S. - 2 inches LONG or DEEP? Drop me your mobile# by mail in case I find any and need to give you a call ... |
|
| Author: | JackZ28 [ Wed Jul 09, 2003 11:42 am ] |
| Post subject: | |
2" deep.. I don't have a mobile. I lost it while riding my bike one day.. Just leave a message on my home phone.. |
|
| Author: | Garry [ Wed Jul 09, 2003 3:53 pm ] |
| Post subject: | |
I'll try to get a quote tonight - check back later, possibly I can bring 'em with me to Bitburg ... |
|
| Author: | JackZ28 [ Wed Jul 09, 2003 6:50 pm ] |
| Post subject: | |
We only have tools in the BX and in the auto parts store.. The selection at both locations sucks major booty! Garry, thanks and let me know.. |
|
| Author: | Garry [ Wed Jul 09, 2003 7:12 pm ] |
| Post subject: | |
Hm ... called, he'll check tomorrow morning - 14 shouldn't be a problem, 9 might be a bit harder to get that long/deep ... |
|
| Author: | JackZ28 [ Wed Jul 09, 2003 7:51 pm ] |
| Post subject: | |
That is awesome Garry.. I really appreciate it.. |
|
| Author: | JackZ28 [ Wed Jul 09, 2003 8:20 pm ] |
| Post subject: | |
GARRY, MAKE THAT A 13MM... NOT 14.. I thought it sounded wrong, but I just verified it.. THANKS! |
|
| Author: | Garry [ Wed Jul 09, 2003 8:34 pm ] |
| Post subject: | |
Let me guess - the 1/2" is slightly too small ... ? OK, noted ... |
|
| Author: | JackZ28 [ Wed Jul 09, 2003 8:52 pm ] |
| Post subject: | |
Damn Garry, I'm glad you made me check again.. 1/2 inch is PERFECT, but I don't have ANY 12 pt. sockets, so can you check for that.. That is all I need- one 1/2" deep 12 pt. socket. 
|
|
| Author: | Garry [ Wed Jul 09, 2003 9:29 pm ] |
| Post subject: | |
Hm ... too bad I don't bring the 79 to Bitburg this time - probably have at least two or three 1/2" sockets in the toolbox ... some are pretty long, too ... OK, will check on the 1/2" then tomorrow ... |
|
| Author: | KC10A [ Wed Jul 09, 2003 9:35 pm ] |
| Post subject: | |
Jack, I have a 1/2 in, 3/8 drive 12 pt. socket if you would like to borrow it. I will try to remember to bring it to work tomorrow. If you want to, we can meet after work. Give me a call at 480-5061. If you see this tonight and there is anything else you need, give me a call at home, 06372-509362. |
|
| Author: | Squirrelina [ Wed Jul 09, 2003 9:44 pm ] |
| Post subject: | |
All kinds of tools, did you ever go to Berger's or what their name is... across the Hornbach in K-Town, not far from Kullmanns. |
|
| Author: | JackZ28 [ Thu Jul 10, 2003 10:31 am ] |
| Post subject: | |
Jerry, you wouldn't happen to have a 3/8" torque wrench, would you? |
|
| Author: | Garry [ Thu Jul 10, 2003 11:32 am ] |
| Post subject: | |
1/2" socket, 3/8" wrench size, external length 54mm, but only 6-point,would be about 9€, 9mm ~€9 as well, ... 1/2" socket, 1/2" wrench size, length 85mm, this one is available with 12 point, ~11€ |
|
| Author: | JackZ28 [ Thu Jul 10, 2003 12:18 pm ] |
| Post subject: | |
Thanks Garry, but I think I'll just borrow Jerry's!
|
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|