F-Body Europe
http://forum.fbodyeurope.org/phpBB3/

Where is everyone???
http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=3738		 Page 1 of 1
Author:  SSZ28 [ Wed Oct 22, 2003 5:57 pm ]
Post subject:  Where is everyone???
Is it just me, or is there less traffic than normal on the board? :? I know alot are deployed :cry: , but it seems that not too many are "visiting". Or is this normal during the winter months? :(
Author:  Daddy [ Wed Oct 22, 2003 10:40 pm ]
Post subject: 
I'm still here! What else would you want?
Author:  Firechicken [ Thu Oct 23, 2003 6:34 am ]
Post subject: 
It seems to have it's moments where it seems kinda dead. I won't be around this weekend, I have a date with the "Firechicken" and the new Frod 9in :burnout: . Gotta get it in this weekend!!!! Wish me luck.
Author:  BenZ28 [ Thu Oct 23, 2003 10:27 am ]
Post subject: 
Firechicken: Good luck!

SSZ28: You're right, traffic is low but it's not winter yet... :P

Ben
Author:  zcam94 [ Thu Oct 23, 2003 10:36 am ]
Post subject: 
Yeah, normaly now is when all the bigger projects go on, so either someone is assking suggestions or for help or selling something. It is kinda dead.
Author:  SSZ28 [ Thu Oct 23, 2003 10:57 am ]
Post subject: 
BenZ28 wrote:
SSZ28: You're right, traffic is low but it's not winter yet... :P

Ben

Don't be so sure of that, it was snowing here Tuesday morning!
Author:  SSZ28 [ Thu Oct 23, 2003 11:02 am ]
Post subject: 
Firechicken wrote:
It seems to have it's moments where it seems kinda dead. I won't be around this weekend, I have a date with the "Firechicken" and the new Frod 9in :burnout: . Gotta get it in this weekend!!!! Wish me luck.

Good luck! I hope that your "Frod" rear is as easy to install as a "Ford"! J/K! :wink:
Now that you'll have the 9", I should volunteer you to re-seal the Bitburg track! I know that you'll be experienced after doing the streets near your house! :twisted:
Author:  Daddy [ Thu Oct 23, 2003 11:37 am ]
Post subject: 
Where did you get that 9 inch?
Author:  Firechicken [ Thu Oct 23, 2003 12:27 pm ]
Post subject: 
ssz28,
I couldn't stand the idea of having a "FORD" product in my ride so I bought a "FROD" instead(LOL) :mrgreen: :burnout:
Daddy2k3,
Roy and I did a purchase together through Thunder Racing. I went through David and he hooked us up. From the day it was ordered until it landed in Frankfurt it was 9 days. Shipping was only $440 for both the rearends. I did save $500 by getting the center section through 4x4 part whole sale. Shipping costed $230 but I had it the next day from California. There is alot of small things I had to do that I didn't know I needed but now have. I you want more info let me know
Author:  SSZ28 [ Thu Oct 23, 2003 2:07 pm ]
Post subject: 
I don't blame you. I'd get the "Frod" too! Just let us know how it turns out for you. 8)
Author:  395stang [ Thu Oct 23, 2003 2:53 pm ]
Post subject: 
I have a frod you can race. And all it has is a measly 306 cubic inches. Do I have any takers in the 1320? I know I am here in the states but you may get a shot at me soon. But if there are any takers in the states I am game. As for the guys in Germany I just picked up my 357(351 bored 30 over) so my 393 project is under way. Can you say 600 @ the wheels? I am shooting for Hawk mph in the 1320
Author:  sven [ Thu Oct 23, 2003 6:15 pm ]
Post subject: 
i'll be out of town for 3-6 months, but I may have web access.....
Author:  Squirrelina [ Thu Oct 23, 2003 7:20 pm ]
Post subject: 
I'm here..., this is me :arrow: 8)
Author:  sven [ Fri Oct 24, 2003 4:35 am ]
Post subject: 
I will remember.......
Author:  Firechicken [ Fri Oct 24, 2003 7:21 am ]
Post subject: 
80killer,
Sure, the 1320, then a 90 degree right and about another 2 miles of twisties :nono: . I'm not stupid, I know what you have, but I'll make you work for it :lol: !!!!!!! If I was there in NC I'd run you for shats & gaggles. If it had to be the 1320 it wouldn't be in the 2001 Trans Am, I'd have to roll out my 73 Firechicken for this one. weight 2750 minus driver, 462ci (Pontiac)550rwhp w/650rwtq (N/A) and a few other goodies with it. There are 2 problems with all of this, 1) your in NC and 2) I'm here in Germany so I guess we'll have to call it a draw for now:wink: . Good luck with the new engine project!!
Author:  LuS1fer [ Fri Oct 24, 2003 7:57 am ]
Post subject: 
If anyone gets lonely, there's an active board here:

http://www.american-auto-club.co.uk/forum
Author:  395stang [ Fri Oct 24, 2003 9:22 pm ]
Post subject: 
How the hell did you get a 73 that light man? Thats as light as my stang and those cars are huge. You must have that thing on one hell of a diet. I will try to keep you posted. And garry I am sending you an email with a pic in it could you post it please.
Author:  Firechicken [ Fri Oct 24, 2003 9:34 pm ]
Post subject: 
80killer,
No interior except 12point cage, 2 RCI racing seats belts and gauges. and lots and lots of fiberglass parts(full nose, door skins, trunk lid and if it didn't have purpose it went!!). The motor itself is 750lbs (PIG!!!!). Kinda takes all the fun of driving it on the street. Thats what the 2001 TA is for.
Author:  395stang [ Sat Oct 25, 2003 5:17 pm ]
Post subject: 
What time do you get with that car in the quarter
Author:  Roy [ Sun Oct 26, 2003 11:08 am ]
Post subject: 
Things Just slowed up here a little bit ,So I am back .I hope i didn't miss too much. Val Iam Checking all my emails now. Ihope the install went easy.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/