F-Body Europe
http://forum.fbodyeurope.org/phpBB3/

Dyno In K-town
http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=3865		 Page 1 of 1
Author:  Black99SuperSport [ Thu Dec 18, 2003 10:45 am ]
Post subject:  Dyno In K-town
I was wondering who has gone and what did it cost???? wondering if anyone else is looking to go. I want to get a baseline before I go to Guam.
Author:  SRZ [ Thu Dec 18, 2003 10:53 am ]
Post subject: 
Try the VW shop down on B40 past the porsche dealership. 40-60 euro I believe. You'll shut it down before you reach 5800 rpm's though. But it's still fun to go there and have everyone watch your car and drool.
Author:  Black99SuperSport [ Thu Dec 18, 2003 2:58 pm ]
Post subject: 
i dought that, my car mostly stock. Shouldn't pull more HP than the dyno can handle. Plus still have the 6000 rev limiter. How accurate is it??
Author:  SRZ [ Thu Dec 18, 2003 3:32 pm ]
Post subject: 
Believe me you'll max it out before 6K if you don't you'll be the 1st fbody modded or not to do so.
Author:  395stang [ Fri Dec 19, 2003 9:23 pm ]
Post subject: 
Its not that you max out the dyno its self it is that you will start ro spin on it. The rollers are slippery and they tried to tell john that BHP stood for British horse power it actually means Brake Horse power. John those #s you put out were for the wheels not the engine so before your new combo you had 430 WHP. :shock: If you could get them too put some traction on the rollers then you should try again. My mustang did the same thing spun its ass off. But he was in 3rd gear and at 3400 rpms it made 325 horses. Accordiing to the dynos here I was making 400 at the wheels .And that was with only 5 lbs of boost. And I think it cost 50 euro.
Author:  MadMav [ Fri Dec 19, 2003 10:10 pm ]
Post subject: 
Uh oh! I see trouble in my future! :D :lol:

Mav
Author:  Roy [ Sat Dec 20, 2003 4:23 am ]
Post subject: 
Did they tie the vehicles down
Author:  395stang [ Sat Dec 20, 2003 9:33 am ]
Post subject: 
No they did not tie vehicles down. In fact they sat in the back of Johns car to try in put weight so it would not spin. The rollers are smooth so your wheels cant get traction. All they would need to do is putgrip tape on them and it would be fine. I wish I could get my car finished so I could get it Dynoed again but my truck went down so I have to spend my rebuild money on it. When rains it pours.I should be up by march..
Author:  Roy [ Sun Dec 21, 2003 4:16 am ]
Post subject: 
Sounds pretty ghetto , Any figures off there would be construed
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/