F-Body Europe
http://forum.fbodyeurope.org/phpBB3/

Paging SSZ28
http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=3985
Page 1 of 1

Author:  JackZ28 [ Tue Jan 20, 2004 5:12 pm ]
Post subject:  Paging SSZ28

Hey man, can you give me directions to that shop, say from Ktown? I'd appreciate it.

Author:  SSZ28 [ Tue Jan 20, 2004 6:28 pm ]
Post subject:  Directions to the powdercoating place in Gieb.

Get on A6, take the A61 "shortcut" south, get back on A6 near Hockenheim towards Heilbronn, get on A81 towards Wurzburg, get on A3 towards Wurzburg/Nurnberg. After passing Wurzburg/Kist exit (1km after getting on A3), you will get off on the next exit (after approx. 5km) B19 and turn right at the light towards Giebelstadt. Drive through Gieb (past sign directing you to the Giebelstadt Army Airfield). Before you get to the Esso station, (once you come around a turn and see it) you will turn left. If you miss it, take the next left right after the Esso, follow road around and at the intersection, turn right. This will be the road that you would have been on if you turned before the Esso. After turning right, go past the big yellow house on the left (50-100 meters) and turn left on the road that will take you behind "Bavaria Yachts". You will see a bunch of direction arrows with some businesses listed on them at the corner. On the right will be a large bus garage and past that will be the place, they have metal bars and what not outside. Good luck. It's not that hard to find, Gieb is tiny. Just drive around Bavaria Yachts and you'll find it.

Author:  JackZ28 [ Tue Jan 20, 2004 6:48 pm ]
Post subject: 

Oh chit, I thought it was closer than that! :shock:

Author:  SSZ28 [ Tue Jan 20, 2004 8:57 pm ]
Post subject: 

It's only 2 hours if the traffic is clear. Plan on at least 2 1/2 to be safe. BTW, Gieb is 15 minutes south of Wurzburg.

Author:  JackZ28 [ Wed Jan 21, 2004 7:08 am ]
Post subject: 

I guess for a savings of 100 Euros it's not that bad. :)

Author:  SSZ28 [ Wed Jan 21, 2004 3:40 pm ]
Post subject: 

Forgot to ask about the turnaround time. :oops: Hopefully it isn't too long.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/