F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
Impala update..................@$@#!%@# http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=4202 |
Page 1 of 1 |
Author: | MadMav [ Thu Apr 01, 2004 11:10 am ] |
Post subject: | Impala update..................@$@#!%@# |
Well, I went and had my friends go pick it up from the parents house finally, With the hope of getting it running right and fixin the tranny so I could take it to Vegas to race it. Then ship it over here. Well, I knew it had a few problems, but jesus! The main problem was that the builder did not hook any of the vacumm lines up correctly, and most importantly left of the one for the FPR. Vacumm diagram is on the damn fan shroud! Meaning the injectors were getting way to much fuel, and drenching the pistons. Which in turn flooded the oil(about a quart). Leading to bearing rot and mucho metal in the filter. Pics below... http://www.imagestation.com/picture/sra ... 3b2eb4.jpg http://www.imagestation.com/picture/sra ... 3b2835.jpg Other problems..... Possible crank damage Possible rod knock Possible front seal leak Amongst a ton of other little stuff. Talks are on-going with the builder to see if he will stand by his work, but it doesn't look good. He is avoiding my calls. So, Along with the $2K in labor, some of my $2.5K of parts might be bad and down the drain. Lovin it. Wish me luck. Mav |
Author: | SRZ [ Thu Apr 01, 2004 12:39 pm ] |
Post subject: | |
Man that is heart breaking. One other thing left out though is you definetly have to get new rings due to cylinder wash. It really makes me wonder whether these people who call themselves race engine builders etc really have a clue to overlook something so small. Man I hope you get that situation resolved because that is unacceptable but we all know how that goes......... ![]() |
Author: | SSZ28 [ Thu Apr 01, 2004 1:30 pm ] |
Post subject: | |
![]() ![]() |
Author: | RobH [ Thu Apr 01, 2004 1:44 pm ] |
Post subject: | |
Man that is sickening. I really wish you the best of luck. Your ati is hooked to the oil pan, or? That would mean your SC pumped all that crap thru itself also. ![]() |
Author: | Garry [ Thu Apr 01, 2004 1:44 pm ] |
Post subject: | |
Why is it every workshop seems to mess up cars they get their hands on? |
Author: | SSZ28 [ Thu Apr 01, 2004 1:56 pm ] |
Post subject: | |
They are hoping that people don't know any better and will just take it back to get it fixed again for more $$$. Can't believe that these shops think that we are ricers. ![]() |
Author: | MadMav [ Thu Apr 01, 2004 2:06 pm ] |
Post subject: | |
Thank goodness the supercharger is self contained, or I would have to rebuild that too. Correct on the ring wash. It does suck, and being 8K miles away doesn't help either. Still can't get ahold of the asshole, but I'm working on it. Thanks, Mav |
Author: | SSZ28 [ Thu Apr 01, 2004 2:10 pm ] |
Post subject: | |
Who was the builder? |
Author: | Garry [ Thu Apr 01, 2004 2:25 pm ] |
Post subject: | |
Nothing a couple friends with baseball bats couldn't take care of, is it? ![]() |
Author: | Squirrelina [ Thu Apr 01, 2004 9:18 pm ] |
Post subject: | |
garry ? ![]() sorry to read, Mav ! That is really sad. |
Author: | Roy [ Fri Apr 02, 2004 4:09 am ] |
Post subject: | |
Sorry to hear your luck. but that wwouldn't stand up in a court at all. Been around to many cases like that. |
Author: | MadMav [ Fri Apr 02, 2004 6:28 am ] |
Post subject: | |
Why do you say that Roy? It's a simple case of cause and effect. Works in court all the time. It was a builder in Elk City, OK. Mav |
Author: | 85z28 [ Fri Apr 02, 2004 11:27 am ] |
Post subject: | |
hay mav who in elk city did you let touch your car. that is where i grew up. i still have a few friends back that way and used to tear up the streets in my maro. that is actually where my maros and the wives firehawk is now let me know if i need to go on leave and visit family or somebodys shop ![]() |
Author: | JackZ28 [ Fri Apr 02, 2004 11:34 am ] |
Post subject: | |
I don't think I will ever let another person (other than a friend) touch my car again. I have had the worst luck with taking the Z to these places. I will get a manual, and I will take my time, save money and make sure it is done right! ![]() ![]() |
Author: | MadMav [ Fri Apr 02, 2004 12:27 pm ] |
Post subject: | |
85z28 wrote: hay mav who in elk city did you let touch your car.
that is where i grew up. i still have a few friends back that way and used to tear up the streets in my maro. that is actually where my maros and the wives firehawk is now let me know if i need to go on leave and visit family or somebodys shop ![]() Matt Beckham at Beckham Auto Machine. My folks live there, and my Dad can be quite mean. ![]() Mav |
Author: | 85z28 [ Fri Apr 02, 2004 7:52 pm ] |
Post subject: | |
i am not for sure but I don't think he has ever had a good reputation. My dad would take stuff up to woodward to a old racing buddy of his but they didn't ever put stuff together for us we just had them for machine work. |
Author: | Roy [ Sat Apr 03, 2004 4:59 am ] |
Post subject: | |
If you think you can win and you do, then go for it . Best of luck |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |