Yeah, you could say that! Thanks anyway. I guess I'll just have to be patient some more!
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Anyone have a driveshaft? http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=4411 |
Page 1 of 1 |
| Author: | JackZ28 [ Tue May 18, 2004 11:22 am ] |
| Post subject: | Anyone have a driveshaft? |
That I can buy cheap, so I can drive my car once I get the rear? Steel or aluminum ok! Chris, do you still have your old one? Bruce told me you bought his! |
|
| Author: | ChrisV6 [ Tue May 18, 2004 1:12 pm ] |
| Post subject: | |
I still have my old one (in fact it's still on the car, i wanted to swap everything this weekend) - but its an V6 two-piece unit, and i´ve heard several times that any power output above 250hp/xxx ftlbs will breake it to even more pieces... (and i guess your LS1 is in that power range) |
|
| Author: | JackZ28 [ Tue May 18, 2004 5:27 pm ] |
| Post subject: | |
Yeah, you could say that! Thanks anyway. I guess I'll just have to be patient some more!
|
|
| Author: | SSZ28 [ Wed May 19, 2004 5:20 pm ] |
| Post subject: | |
We have a WANTED section now... check this out, $50 http://www.musclemotorsports.com/drivet ... -used.html ...if they're good enough for 700+hp NASCAR... |
|
| Author: | chevyz28 [ Thu May 20, 2004 8:37 pm ] |
| Post subject: | |
Jack, Drop me an e-mail...I think I can hook you up with an aluminum one... |
|
| Author: | JC [ Thu May 20, 2004 9:18 pm ] |
| Post subject: | |
I have ome out of a 91 RS but i am not sure if it will work on your car. Anyone know?? |
|
| Author: | JackZ28 [ Fri May 21, 2004 7:10 am ] |
| Post subject: | |
John, if Barry's offer falls through, I will let you know! Thanks guys, Jack |
|
| Author: | JC [ Fri May 21, 2004 7:19 pm ] |
| Post subject: | |
If you need it while your waiting for the deal with barry and it will fit you can have it but most likely wont be able to handle the full wrath of your beast. Just going to end up tossing it sooner or later. |
|
| Author: | chevyz28 [ Fri May 21, 2004 9:44 pm ] |
| Post subject: | |
Jack, you have mail. |
|
| Author: | chevyz28 [ Fri May 21, 2004 9:46 pm ] |
| Post subject: | |
John, If I can get Jack hooked up and you're still willing to part ways with your 91's d/s, I'll take it off your hands. |
|
| Author: | JackZ28 [ Sat May 22, 2004 8:38 am ] |
| Post subject: | |
John, is it steel or aluminum? |
|
| Author: | goaliedave40 [ Sat May 22, 2004 9:07 pm ] |
| Post subject: | |
Cm'on! A carbon fiber d/s is only 800 bucks! Chump change! 
|
|
| Author: | chevyz28 [ Sat May 22, 2004 10:28 pm ] |
| Post subject: | |
Jack, the alum d/s is MIA... If I can get you one to borrow, will that work? |
|
| Author: | JackZ28 [ Sun May 23, 2004 9:55 am ] |
| Post subject: | |
Yes that will work. I just want to be able to drive it. I will order a new one as soon as I get the rear put in. I just want to go to Bitburg for the June meet. I decided against Rock Am Ring.. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|