| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Chevys at next Bit http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=4652 |
Page 1 of 1 |
| Author: | Squirrelina [ Sun Jul 18, 2004 9:24 am ] |
| Post subject: | Chevys at next Bit |
On 31 July: Axel is planning to bring the El Camino, Rick will race the 79 Camaro, Dennis will run the Nova a last time before Hockenheim. If I could drive 2 cars I'd take another Chevy to Bitburg, but... I better take the Terrano and the trailer. We thought since most of you are gone to Munich, we got to have a balance to the beetles 
|
|
| Author: | goaliedave40 [ Sun Jul 18, 2004 10:28 pm ] |
| Post subject: | |
I will be there. By then, I should be lowered and aligned. Hopefully, the c-clip eliminator kit I got won't be too hard to put in. Whenever the directions say "cut" or "grind", bad things tend to happen.  Is there somewhere around Bitburg I could get some drag radials? I would love to see what kind of a diffrence they would make. I could mount them on my OEM 16" rims. All the forums I go to about drag racing say I should be in the low 13's, even high 12's with the dyno numbers I have. 14.1 is not very cool. (Can't be the driver, can it?  )
|
|
| Author: | Daddy [ Mon Jul 19, 2004 1:51 am ] |
| Post subject: | |
I have a pair of salad shooters I'll sell ya cheap. $75 |
|
| Author: | Roy [ Mon Jul 19, 2004 2:55 am ] |
| Post subject: | |
Goalie, those c-clip elims aren't made from Moser are they . If they are there only good for the drag strip. They won't take the lateral loads of daily street driven due to the size and design of the bearing. |
|
| Author: | Daddy [ Mon Jul 19, 2004 4:53 am ] |
| Post subject: | |
Roy, how the hell do you know about everything? Did you take a class or something? |
|
| Author: | JackZ28 [ Mon Jul 19, 2004 6:08 am ] |
| Post subject: | |
Roy has been around the block a few times. He's had muscle cars since you were a bulge in your daddy's pants. 
|
|
| Author: | Daddy [ Mon Jul 19, 2004 3:19 pm ] |
| Post subject: | |
You sure are talking about guys pants alot now. Hmm....... 
|
|
| Author: | Squirrelina [ Mon Jul 19, 2004 7:36 pm ] |
| Post subject: | |
| no comment
|
|
| Author: | Squirrelina [ Tue Jul 20, 2004 4:43 pm ] |
| Post subject: | |
...and my Boss said today he will be bringing his year 39 'tweety' and stay all weekend... since he don't feel like driving all the way to Munich. |
|
| Author: | goaliedave40 [ Tue Jul 20, 2004 10:52 pm ] |
| Post subject: | |
Roy wrote: Goalie, those c-clip elims aren't made from Moser are they . If they are there only good for the drag strip. They won't take the lateral loads of daily street driven due to the size and design of the bearing.
Oh, sh!t.  I guess I will hve to buy new shafts after all.  Thanks for the heads up. It would be embarrassing to have a wheel fall of at the 'Ring. When I bought them, I didn't realize they would take the place of the wheel bearing. A little knowledge is a dangerous thing, I guess.
|
|
| Author: | JackZ28 [ Wed Jul 21, 2004 9:30 am ] |
| Post subject: | |
I thought about that too man, and then realized I couldn't really use them. They would certainly be nice though. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|