|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 7 posts ] |
|
Author |
Message |
Phoenix95
|
Post subject: how to break into a fbody......... Posted: Tue May 29, 2001 1:07 pm |
|
Joined: Sat May 26, 2001 11:48 pm Posts: 61 Location: El Paso, TX
|
well all you need is two car antennas, three zip ties an allen wrench and about two feet of speaker wire. oh and a little skill. lash the two antennas together with two zip ties, then zip tie the allen wrench to one end and lash it securely to the antenna with the speaker wire. bend out the glass and slide the lock forward. hah.....laugh it up ´cause that´s what it took this weekend to get my door open after i lock my keys in my car. i assure you from now on i will check twice before i jump out of my car in heavy traffic without the keys. most of the credit though must go to aaron, he´s the one that came to my rescue.
_________________ '95 Firebird formula: Moroso Cold Air Induction, Hypertech Power Tuning, MSD Super Conductor Wires, Vortec Intake Elbow, Edelbrock TES Headers, Edelbrock 3" Cat Back, Eaton HD Posi Diff, 3.42 gears, Tranny Upgrade, De-screened MAF, 2.5k rpm Torque Conv
|
|
Top |
|
Roy
|
Post subject: Posted: Tue May 29, 2001 1:16 pm |
|
Joined: Sun May 27, 2001 2:52 pm Posts: 5556 Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
Top |
|
Garry
|
Post subject: Posted: Tue May 29, 2001 2:20 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Quote: well all you need is two car antennas, three zip ties an allen wrench and about two feet of speaker wire. oh and a little skill. lash the two antennas together with two zip ties, then zip [..] Wanna try that on mine on the 16th? You're invited ...
|
|
Top |
|
JackZ28
|
Post subject: Posted: Tue May 29, 2001 3:59 pm |
|
Joined: Mon May 28, 2001 6:03 pm Posts: 8686 Location: Houston, TX
|
Interesting, but I always leave mine in the ignition, until I know that I'm out, because it won't let you lock the car with the keys still in the ignition..
_________________
http://www.myspace.com/jackster31b
|
|
Top |
|
99taws6
|
Post subject: Posted: Tue May 29, 2001 7:30 pm |
|
Joined: Sat May 26, 2001 6:35 pm Posts: 954
|
Quote: Wanna try that on mine on the 16th? You're invited ...
YOurs is no problem.... All you need is a razorblade, some clear tape and no skill... First you slice a hole in the top with the blade, reach in and unlock it with your hand. Once you are inside use the clear tape to reseal the hole..... I will bring my tools on the 16th..... LOL
|
|
Top |
|
Garry
|
Post subject: Posted: Tue May 29, 2001 7:55 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Quote: YOurs is no problem.... Guess I'll make it a bit easier for you - I'll leave the roof down ...
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
Roy
|
Post subject: Posted: Wed May 30, 2001 4:55 am |
|
Joined: Sun May 27, 2001 2:52 pm Posts: 5556 Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
Top |
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 31 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
| |