Just in case you didn't know but the aluminum driveshaft from a 4th generation Camaro will fit our cars. I have an aluminum driveshaft from a 2002 SS Camaro on mine.
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| ALUM Driveshaft http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=6061 |
Page 1 of 1 |
| Author: | Jazzy91 [ Wed Sep 28, 2005 1:28 pm ] |
| Post subject: | ALUM Driveshaft |
Anybody have a aluminium drive shaft that will fit a 91 Camaro? |
|
| Author: | Uncle Slappy [ Wed Sep 28, 2005 10:53 pm ] |
| Post subject: | |
Just in case you didn't know but the aluminum driveshaft from a 4th generation Camaro will fit our cars. I have an aluminum driveshaft from a 2002 SS Camaro on mine.
|
|
| Author: | Jazzy91 [ Thu Sep 29, 2005 5:50 am ] |
| Post subject: | |
Yea the one on my car is from a 2000 but its not alum. |
|
| Author: | slickmetal.com [ Thu Sep 29, 2005 7:36 am ] |
| Post subject: | Re: ALUM Driveshaft |
Jazzy91 wrote: Anybody have a aluminium drive shaft that will fit a 91 Camaro?
you and me both brotha. |
|
| Author: | spade [ Thu Sep 29, 2005 10:31 am ] |
| Post subject: | |
Why are you trying to switch over? |
|
| Author: | Uncle Slappy [ Thu Sep 29, 2005 11:36 am ] |
| Post subject: | |
Jazzy91 wrote: Yea the one on my car is from a 2000 but its not alum.
Is it from a V6? From my understanding the V6 driveshaft is a two piece kinda like a big truck's driveshaft. As far as why the switch, aluminum is much lighter than steel ones which will in turn spool up the power quicker. Make sure you get one with vibration damper on it. It kicks butt!! |
|
| Author: | Lancer033 [ Thu Sep 29, 2005 11:51 am ] |
| Post subject: | |
aluminum is good, but you really need to find someone to make one of these bad boys for the F-body http://www.lgmotorsports.com/catalog/pr ... cts_id=789 |
|
| Author: | Garry [ Thu Sep 29, 2005 12:08 pm ] |
| Post subject: | |
Hey, at that price, I'd take 3 and store them for the time when I'll someday have a C5 ... 
(FYI: currently, the website says it's $0.00) |
|
| Author: | IROC [ Thu Sep 29, 2005 6:04 pm ] |
| Post subject: | |
I want a CF driveshaft too !! maybe we should start a GP ?!?! Any takers ?
|
|
| Author: | SRZ [ Fri Sep 30, 2005 5:03 am ] |
| Post subject: | |
I own a CF driveshaft and wouldn't recommend anything other than that. Night and day difference compared the alum ds. Don't spend the $$$ for a new one wait and find a used one. 
|
|
| Author: | SRZ [ Fri Sep 30, 2005 5:04 am ] |
| Post subject: | |
If you have to settle for a alum vs go w/ the TPIS unit or Lingenfelter. I'd buy it used too if you can. |
|
| Author: | Jazzy91 [ Fri Sep 30, 2005 2:10 pm ] |
| Post subject: | |
Im not ballin like you Silas. I just was looking to see if anybody out there had one. I blew a head gasket on the 383. 
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|