Me too...
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| hockenheim ring 29jan http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=6255 |
Page 1 of 2 |
| Author: | Roy [ Sat Jan 21, 2006 9:32 pm ] |
| Post subject: | hockenheim ring 29jan |
its official , the ring will be open on 29Jan from 11am til 4pm. i shall bether if it is dry and above freezing. |
|
| Author: | AutobahnZ06GT [ Sat Jan 21, 2006 10:42 pm ] |
| Post subject: | |
Me too...
|
|
| Author: | Garry [ Sun Jan 22, 2006 12:02 am ] |
| Post subject: | |
Hm ... do they offer snow-drift in case it snows? 
|
|
| Author: | Lancer033 [ Sun Jan 22, 2006 1:29 am ] |
| Post subject: | |
i'll be in the states 
|
|
| Author: | 85z28 [ Sun Jan 22, 2006 12:27 pm ] |
| Post subject: | |
hey somebody gonna let me ride? the hooptie has falling into disrepair and I don't really care about fixing it cause I leave soon. |
|
| Author: | CandyMan [ Sun Jan 22, 2006 3:30 pm ] |
| Post subject: | |
CandyMan wrote: Dont forget to shoot some vids for us
|
|
| Author: | Roy [ Sun Jan 22, 2006 6:33 pm ] |
| Post subject: | |
85z28 wrote: hey somebody gonna let me ride?
the hooptie has falling into disrepair and I don't really care about fixing it cause I leave soon. You make it down there i'm sure you be able to get a ride in. |
|
| Author: | 85z28 [ Sun Jan 22, 2006 8:33 pm ] |
| Post subject: | |
Roy wrote: 85z28 wrote: hey somebody gonna let me ride? the hooptie has falling into disrepair and I don't really care about fixing it cause I leave soon. You make it down there i'm sure you be able to get a ride in. that shouldn't be to hard it's not to far. and I still have the family car that drives just fine. just gotta talk the wife into it. |
|
| Author: | TurboManiacal [ Sun Jan 22, 2006 9:02 pm ] |
| Post subject: | |
"He said doin the nasty" I'll be there. Anybody know what brake pads I shoudl buy to replace the stocker wilwoods I have on my 6pot calipers? |
|
| Author: | BenZ28 [ Mon Jan 23, 2006 11:17 am ] |
| Post subject: | |
Sure, I'll be there... Ben |
|
| Author: | Lancer033 [ Mon Jan 23, 2006 11:32 am ] |
| Post subject: | |
TurboManiacal wrote: "He said doin the nasty" I'll be there. Anybody know what brake pads I shoudl buy to replace the stocker wilwoods I have on my 6pot calipers?
The Wilwood kits usually come with E-compound pads, which is the pad I've been using for about a year now, it's great for Street/AutoX and the ring, but I'd be Hockenheim will be too much for them. Most of the guys on the Corvette forum swear by the H-compound for heavy track use, but it's not really a daily driver pad, so you'll need to change them out. They'll get you to and from the track just fine, but it'd be best to swap them out. A lot of guys use the Q-compound for street driving and Hs for track days. You should be able to get both in the 7416 shape and stock size rears (don't remember the #) THe PB-10 is a new compound, it's suposed to perform close to the Es, but with less dust. you can see all of the pad compounds here http://brakepads.wilwood.com/01-selection/index.html |
|
| Author: | TurboManiacal [ Mon Jan 23, 2006 3:24 pm ] |
| Post subject: | |
15H-8114K / 15E-6084K Is that the right part number for a Superlite 6 Piston Caliper? |
|
| Author: | Lancer033 [ Tue Jan 24, 2006 11:43 am ] |
| Post subject: | |
depends on the which SL-6 you've got. Most of the OEM replacement kits sold by Wilwood use the narrower SL-6 which takes a .65" thick pad 7416 shape (http://brakepads.wilwood.com/06-illustrations/pages/7420.html). The wider SL-6R uses a .80" thick, 7420 shape (http://brakepads.wilwood.com/06-illustrations/pages/7416.html). Those are the right part #s for the 7420 shape, but if you've got the narrow SL-6s, they won't clear your rotors so you'll need the 7416 shape which is part # 15H-8546K & 15H-8546K If you still have the box, you can match the part # up with this page to see which shape you need, check with the vendor or measure it. http://brakepads.wilwood.com/04-race/wilwood.html. |
|
| Author: | Garry [ Sat Jan 28, 2006 7:39 pm ] |
| Post subject: | |
So, is it snow-drifting in Hockenheim tomorrow? Will the track even be open? Who's coming? |
|
| Author: | Roy [ Sat Jan 28, 2006 7:47 pm ] |
| Post subject: | |
i will be there around 11 |
|
| Author: | 85z28 [ Sat Jan 28, 2006 10:56 pm ] |
| Post subject: | |
I am not coming anymore have to much $hit to do to get ready to leave. |
|
| Author: | Roy [ Sun Jan 29, 2006 4:08 pm ] |
| Post subject: | |
Awesome track conditions if you had AWD. Got stuck three times in the parking lot. 
|
|
| Author: | Garry [ Sun Jan 29, 2006 4:12 pm ] |
| Post subject: | |
Ouch ... better there than on the track ... so, how many laps did you dare? |
|
| Author: | Roy [ Sun Jan 29, 2006 5:18 pm ] |
| Post subject: | |
The track had about 2 inches of snow on it. Closed ... Had about 40-60 hadr core people wanting to hit it . Just no clean track. On a side note my exhaust on a throttle blip hits 126 decibel while idling it is 103. 
Just slightly over the limit. |
|
| Author: | Garry [ Sun Jan 29, 2006 5:23 pm ] |
| Post subject: | |
Ahem ... lucky you, that it's only SLIGHTLY over ... *gg* |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|