I've got 285's on my 11's on 4 corners.
Only 2 pics I have though are these here.
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Pics of 285s on 17x11s http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=6477 |
Page 1 of 1 |
| Author: | RTZSS [ Mon Apr 17, 2006 3:29 pm ] |
| Post subject: | Pics of 285s on 17x11s |
Anyone here know where I can see what a set of 285s look like mounted on 17x11s? I am running 315s right now and getting ready to buy some new tires. Seems to be a hell of a lot more choices stepping down. Thanks in advance! Rat |
|
| Author: | Garry [ Mon Apr 17, 2006 3:31 pm ] |
| Post subject: | |
Isn't 285 a bit too slim for that wheel? |
|
| Author: | RTZSS [ Mon Apr 17, 2006 3:41 pm ] |
| Post subject: | |
nahh, 275, 285 and 315 will fit a 17x11 according to most tire manufacturers I have researched. The million dollar question is how will it look though? |
|
| Author: | Lancer033 [ Mon Apr 17, 2006 4:00 pm ] |
| Post subject: | |
what about a 295? i've got 295s on a 10.5" wheel. Should look pretty close and there are a lot of options out there? |
|
| Author: | RTZSS [ Mon Apr 17, 2006 4:22 pm ] |
| Post subject: | |
Not a lot of options for a 295/xx/17 that I have found, are you running 18s? 295s on 17s I have found so far are competition only. |
|
| Author: | Lancer033 [ Mon Apr 17, 2006 6:19 pm ] |
| Post subject: | |
sorry, long day need to read better - 295s are on the 18s, |
|
| Author: | TurboManiacal [ Mon Apr 17, 2006 7:47 pm ] |
| Post subject: | |
I had 315's on my 17x11 that I ran on the Typhoon. |
|
| Author: | SRZ [ Tue Apr 18, 2006 9:17 am ] |
| Post subject: | |
I've got 285's on my 11's on 4 corners. Only 2 pics I have though are these here.
|
|
| Author: | RTZSS [ Tue Apr 18, 2006 8:16 pm ] |
| Post subject: | |
Thanks Silas! Now I just have to decide wether or not to run a 285 or a 275 on a 17.9.5 (up front) Did you have to employ a BFH for your rears? |
|
| Author: | T.E.K. [ Thu Apr 27, 2006 11:59 am ] |
| Post subject: | |
No BFH is required. I rolled mine anyways just for good measure. |
|
| Author: | Chevroletfreak [ Thu Apr 27, 2006 6:51 pm ] |
| Post subject: | |
I don't have my fenders rolled and do have 285's on my rear 10.5's It lloks much better than it did with the 275's back there. On a side note...Does anyone have a fender rolling tool here in Germany? |
|
| Author: | TurboManiacal [ Thu Apr 27, 2006 8:51 pm ] |
| Post subject: | |
Chevroletfreak wrote: I don't have my fenders rolled and do have 285's on my rear 10.5's It lloks much better than it did with the 275's back there.
On a side note...Does anyone have a fender rolling tool here in Germany? Any body shop should have it. I'm getting mine rolled next time I get it detailed. |
|
| Author: | Daddy [ Fri Apr 28, 2006 3:41 am ] |
| Post subject: | |
That guy in Spangdahlem (sp?) has it. Silas has his number |
|
| Author: | SRZ [ Fri Apr 28, 2006 8:21 am ] |
| Post subject: | |
Chevfreak I shot you a pm or 2. Number in the pm. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|