... to the tuning on Friday/Saturday? I will be going down on Saturday to watch a bit, maybe ask a couple questions
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Who's going ... http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=7452 |
Page 1 of 1 |
| Author: | Garry [ Thu Jun 07, 2007 7:45 pm ] |
| Post subject: | Who's going ... |
... to the tuning on Friday/Saturday? I will be going down on Saturday to watch a bit, maybe ask a couple questions
|
|
| Author: | a10beav [ Thu Jun 07, 2007 9:07 pm ] |
| Post subject: | |
I missed this topic. Tunig where? I don't need anything, but I might go check it out too. |
|
| Author: | Garry [ Thu Jun 07, 2007 9:16 pm ] |
| Post subject: | |
Bosch-Service Henni GmbH Asemweg 2 73249 Wernau |
|
| Author: | Roy [ Fri Jun 08, 2007 5:02 am ] |
| Post subject: | |
Gas and tires are gettin too expensive . |
|
| Author: | SRZ [ Fri Jun 08, 2007 8:05 am ] |
| Post subject: | |
Roy are you kidding me? You must be savin up for something. 
|
|
| Author: | Garry [ Fri Jun 08, 2007 8:36 am ] |
| Post subject: | |
Well, Roy went over to the dark side, and it's suckin' up all his money I reckon
|
|
| Author: | Roy [ Fri Jun 08, 2007 9:20 am ] |
| Post subject: | |
I just relized this hobby is expensive . Also trying to get another Ford 9inch dropout for the Camaro And a few repair parts for the Cossie , The stuff on there is geting old and needs replacing. So I am saving for a ballbearing GT35 , 8 injector manifold , secondary fuel & water injection computer with a 3 bar map sensor. |
|
| Author: | BenZ28 [ Fri Jun 08, 2007 12:01 pm ] |
| Post subject: | |
I thought about going but now I'm sitting here at work... Ben |
|
| Author: | Roy [ Fri Jun 08, 2007 12:39 pm ] |
| Post subject: | |
|
|
| Author: | Roy [ Fri Jun 08, 2007 12:40 pm ] |
| Post subject: | |
:werd: :leaves desk: |
|
| Author: | Garry [ Fri Jun 08, 2007 1:04 pm ] |
| Post subject: | |
Working today, too ... but headin' down tomorrow ... |
|
| Author: | a10beav [ Fri Jun 08, 2007 9:38 pm ] |
| Post subject: | |
Garry wrote: Bosch-Service Henni GmbH
Asemweg 2 73249 Wernau This is in Wernau? East of Stuttgart? |
|
| Author: | Garry [ Fri Jun 08, 2007 9:40 pm ] |
| Post subject: | |
Yes. Check http://www.reiseplanung.de for some directions ... |
|
| Author: | a10beav [ Fri Jun 08, 2007 10:30 pm ] |
| Post subject: | |
Ok. I'm probably not going to make it. If I can get an angle finder I want to fix my pinion angle, and I might install a new radio. You guys have fun 
|
|
| Author: | a10beav [ Mon Jun 11, 2007 8:40 pm ] |
| Post subject: | |
So how was this? |
|
| Author: | Garry [ Mon Jun 11, 2007 9:08 pm ] |
| Post subject: | |
Apart from the Thunderstorm with hail it was pretty cool ... the guy seems pretty knowledgeable, gave me some hints about how to hunt down the knock I still get ... from what I saw he got something around 10-15kW (to the wheels) out of most of the cars, compared with the base setup ... torque went up even better ... too bad all my tuning-reasons are still downstairs in the boxes ... would have probably been worth it ... |
|
| Author: | SRZ [ Tue Jun 12, 2007 9:11 am ] |
| Post subject: | |
Garry, Tony told me you've got the VE tables down pretty good. Looks like I'm gonna have to bug you for some tips.
|
|
| Author: | Garry [ Tue Jun 12, 2007 10:21 am ] |
| Post subject: | |
VE Tables aren't much of a problem to tune w/ LS1, WBO2 & EFILive ... can't say what all is involved with an LT1 though ... |
|
| Author: | SRZ [ Tue Jun 12, 2007 10:25 am ] |
| Post subject: | |
Probably not much difference. I'm SD too so that makes it easier so to speak. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|