It looks like the valves were playing kissy face with the pistons.
The Biatch steh bolts
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Got the head pulled off the Sierra finally. http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=7647 |
Page 1 of 1 |
| Author: | Roy [ Sat Sep 08, 2007 6:29 pm ] |
| Post subject: | Got the head pulled off the Sierra finally. |
It looks like the valves were playing kissy face with the pistons.
The Biatch steh bolts
|
|
| Author: | Garry [ Sat Sep 08, 2007 6:36 pm ] |
| Post subject: | |
Ouch ... |
|
| Author: | BenZ28 [ Sun Sep 09, 2007 10:51 am ] |
| Post subject: | |
Finally. Did you have to move the engine around a bit to get them off? Ben |
|
| Author: | Roy [ Sun Sep 09, 2007 2:22 pm ] |
| Post subject: | |
Just use a engine hoist to get a good pull on it . |
|
| Author: | jeejee [ Sun Sep 09, 2007 11:10 pm ] |
| Post subject: | |
allmost all the original pistons have kissing marks on them not to worry... throw away the stehbolzen and use the ORIGINAL ford head bolts, these seem to work better.... (and a lot easier to get the head off next time 
only problem with using these is there are no locater dowels for the head in the block, so be carefull when installing the head. i had problems with the post motorsport head studs, now with the normal ford bolts, i haven't had a problem yet |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|