any one know of a good body shop around? preferably in the spang area but i could also drive to the ramstein area. come my winter plans ill have to get them rolled so my tires will fit nicely.
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| fender rolling??? http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=8248 |
Page 1 of 1 |
| Author: | 93_Z28_Guy [ Sun Oct 26, 2008 12:26 am ] |
| Post subject: | fender rolling??? |
dose any one know of any place to get fenders rolled or dose any one have a tool to do it? -Tony |
|
| Author: | Roy [ Sun Oct 26, 2008 7:38 am ] |
| Post subject: | Re: fender rolling??? |
Most bodyshops have one. |
|
| Author: | Chevroletfreak [ Sun Oct 26, 2008 1:11 pm ] |
| Post subject: | Re: fender rolling??? |
Roy wrote: Most bodyshops have one. Here? Really? I never even thought to ask. |
|
| Author: | 93_Z28_Guy [ Sun Oct 26, 2008 4:32 pm ] |
| Post subject: | Re: fender rolling??? |
any one know of a good body shop around? preferably in the spang area but i could also drive to the ramstein area. come my winter plans ill have to get them rolled so my tires will fit nicely.
|
|
| Author: | SRZ [ Mon Oct 27, 2008 11:23 pm ] |
| Post subject: | Re: fender rolling??? |
Mark Libida. Look him up. He rolled my fenders back in 05'. He's down the street from the AB in Spang and can't remember the village. All I know is you go through the traffic circle and go straight, you'll pass the little FORD dealership and keep going straight. You'll come up to a slight incline through the village and almost at the top of the incline you can make a left. Take that left and he's 200 meters on the right. He does paint and everything. THE ONLY GUY I trusted w/ my car the 8 yrs I was there. If you see him...tell him Silas says "hello". |
|
| Author: | chieftransam [ Tue Oct 28, 2008 9:16 am ] |
| Post subject: | Re: fender rolling??? |
Yeah Mark's out in Binsfield and he's a good guy to deal with. He changed a seal for me in my 12 bolt a month or so ago. |
|
| Author: | 93_Z28_Guy [ Thu Oct 30, 2008 11:38 pm ] |
| Post subject: | Re: fender rolling??? |
cool thanks for the info...and if i may ask what did it cost to get them rolled? |
|
| Author: | theshadowed1 [ Mon Nov 03, 2008 9:35 pm ] |
| Post subject: | Re: fender rolling??? |
A good friend of mine is good too. His name is Dirk Groeff over in Zell Barl on the Mosel river. You name it and he can do it!!! Paint, weld, make pipes, body work, laser alignment, etc.... He only works on American cars. DO NOT GO TO WERKMEISTER IN BITBURG. I had him (being a dummy) to swap the fuel pump in my Tahoe and wouldn't you know...not even three weeks later, my fuel guage bouces around with a life of it's own. |
|
| Author: | theshadowed1 [ Mon Nov 03, 2008 9:35 pm ] |
| Post subject: | Re: fender rolling??? |
A good friend of mine is good too. His name is Dirk Groeff over in Zell Barl on the Mosel river. You name it and he can do it!!! Paint, weld, make pipes, body work, laser alignment, etc.... He only works on American cars. DO NOT GO TO WERKMEISTER IN BITBURG. I had him (being a dummy) to swap the fuel pump in my Tahoe and wouldn't you know...not even three weeks later, my fuel guage bouces around with a life of it's own. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|