| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| check out these prices http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=11&t=912 |
Page 1 of 1 |
| Author: | guerardsgt [ Sun Oct 14, 2001 10:03 am ] |
| Post subject: | check out these prices |
I found this site and the prices do not seem so bad for what you get. Fully assembled http://www.crateengine.net better yet how about this one!! http://www.built4speed.com/350_stroked_to_383.htm what do you guys think bad or good??? |
|
| Author: | fbody97 [ Sun Oct 14, 2001 3:28 pm ] |
| Post subject: | |
Those are good prices!! The only thing is the LT1 is different. The 350 kits are cheaper than the LT1 kits. There is also this one: http://www.strokerkits.com |
|
| Author: | guerardsgt [ Sun Oct 14, 2001 4:06 pm ] |
| Post subject: | I could be wrong |
Dave did you already research this place. If you look down the bottom it says also ls1 and lt1's. The price may go up for the Lt1 but It shouldn't be to bad. I'm going to ask them about the 600hp naturaly aspirated one they have. I just have to wait till there open so I can give them a call. |
|
| Author: | guerardsgt [ Sun Oct 14, 2001 4:24 pm ] |
| Post subject: | Dave |
I checked out that sight but after doing alot of thinking. I want to go the already bored and assembled route. I would rather pay 500 in shipping than pay 1500 for assembly. I want to plug and play this bad boy. Plus I don't want to tow my car anywhere. |
|
| Author: | fbody97 [ Sun Oct 14, 2001 7:52 pm ] |
| Post subject: | |
Yeah that's cool. i came to that same conclusion. I'm going through the GP Nu-Tek Motorsports is doing. The guy organizing it is basically giving me one of his spare blocks. I'm going to have Tony port my heads and have them port matched to the intake. I believe he is going to port the intake also, but not sure. So the short block will come to just under $4000. |
|
| Author: | Hawk [ Sun Oct 14, 2001 7:59 pm ] |
| Post subject: | |
Holy smokes sounds like you guys wanna put me in the rear veiw mirror? 600 Ha Pees on the street? I know it can be done I plan on 450-480 Ha Pees and I still plan on winning?LOL Maybe!!! |
|
| Author: | fbody97 [ Sun Oct 14, 2001 8:20 pm ] |
| Post subject: | |
Mine should push 450 at the wheels plus the happy gas too. Want to buy me a 12 bolt? |
|
| Author: | Hawk [ Sun Oct 14, 2001 8:27 pm ] |
| Post subject: | |
I gotta get one first. You can run the one you have for a year if you find a spare? |
|
| Author: | guerardsgt [ Sun Oct 14, 2001 9:25 pm ] |
| Post subject: | I'm not playing |
with this new build up you can mark my words. I've always wanted to make my car the baddest on the street and now I have the perfect chance. I figure I don't want to do this again in a few years to get what I want the first time. I also figure 600 engine hp plus a 12-16pnd super charger look out it probably won't be streetable. But for now i'll just go natural and enjoy. I'm looking forward to the day I show Bruce the back end of a 96 green Z. lol |
|
| Author: | Robert13p3h [ Sun Oct 14, 2001 11:15 pm ] |
| Post subject: | |
Besides the reverse cooling heads, what is so differant between a 1980 350, and a 1993-97 350? Everything concerning the stroker, should be identical. Atleast thats what I thought? |
|
| Author: | guerardsgt [ Mon Oct 15, 2001 1:04 am ] |
| Post subject: | I'm not sure |
As far as internals go but the external's maybe a little different. As far as bolt patterns on some of the parts, water pump may have a different design on the block. Other than that not sure of the rest. I know the price is going to raise when I call these people up and tell them the year of the car for sure. |
|
| Author: | fbody97 [ Mon Oct 15, 2001 6:08 am ] |
| Post subject: | |
I'm not sure either but I know there is a difference in $$$. |
|
| Author: | kingarrthuu [ Mon Oct 15, 2001 9:51 am ] |
| Post subject: | |
Nice price at the sites you listed.. I figure the best on them is if you go sigle parts and can do most of the work yourself. That is if you have the tools and time. |
|
| Author: | Robert13p3h [ Mon Oct 15, 2001 12:03 pm ] |
| Post subject: | |
Thats just it, there is no differance. The LT1 has differant accsy, and differant heads, but the iron block is a block, is a block. A L98 stroker kit, should contain the same pieces as a LT1 kit. All it is, is crank, rods, pistons and some bearings...right? I havent shopped these kits, so you guys are way more "hip" to the prices and equipment than me, just wonder if they raise prices just because 93-97 (obvious that it happens) but a informed buyer could get around that I would think. |
|
| Author: | Hawk [ Mon Oct 15, 2001 1:24 pm ] |
| Post subject: | |
Rob you are right the heads, water pump, intake is what made the updated LT1 Gen II small block. Bottom line A complete short block should work with very few proplems if you install the LT1/LT4 heads/ water pump and ignition system. |
|
| Author: | guerardsgt [ Wed Oct 17, 2001 6:56 pm ] |
| Post subject: | ? |
The L98 and an LT1 have different shapes on water pump. And the other thing is the distributor in the rear of the engine there maybe a way to get around it but it may cost some $$$$$$. I may be wrong but I was talking with someone that mentioned that. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|