 |
View unanswered posts | View active topics
| Author |
Message |
|
JackZ28
|
Post subject:  Posted: Thu Jun 03, 2004 6:30 pm |
|
Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
|
|
| Top |
|
|
RobH
|
Post subject: Posted: Thu Jun 03, 2004 6:46 pm |
|
 |
| Senior Member |
|
Joined: Wed Apr 23, 2003 2:48 am
Posts: 399
Location: Lawton, Ok
|
85z28 wrote: the stuff I am asking about first off i need to know if it will work in a 3rd gen. more importantly a an 87 iroc that will have a t-56 in it
I would like to see the g-trac torque arm
I know what the driveshaft looks like so i just need to be reassured that it would fit in a 3rd gen with a t56
also interested in the bolt in cage. and the weld in lca mounts.
how much do you want for this stuff. I am also not in any hurry I have a buddie in Lawton so i would probably see if he could get the stuff for now or something
I dont know how to reassure you without actually measuring yoke to yoke, but I will tell you that the drive shaft is out of the 921LE. That was the tsb fix for a imbalanced shaft that plagued the 94's.
So I will assume (can be dangerous I know) that since the ds came from a 3rd gen Fbody, and I have a T56, it will fit. If you want to see alittle more of the cage from the orginator, look here.
http://www.wolferacecraft.com/install/fbod/fbodbar.aspx
or
http://www.thunderracing.com/catalog/?action=vshop&vid=4&pcid=41
or
http://www.hawksthirdgenparts.com/inc/pdetail?v=1&pid=8807
If you want pics of mine, I can do that also. Mine is mild steel with swing outs for driver and passenger, belt loops on the cross bar driver/passenger and the under seat bar driver side for the 5 point of the harness.
The weld in mounts are easy, brand new, and you can research them anywhere.
The Trac-link is alittle more complex. According to Global West site they are listing differant kits for the 3rd and 4th gens (im not real sure what the diff is) here are some pics you can look at, and I can get you pics of mine if you want to see mine. Its a good concept, and if you end up getting a torque arm I would recommend something like this. I dont like stressing the tranny anymore than required and these setup's move the pivot point away from it.
http://www.hotrod.com/hotrod/featuredvehicles/p108258_image_large.jpg
http://www.globalwest.net/camaro93.htm#TRACLINK%20kits
weld in anti-squat brackets with all hardware - 50
Wolf 6pt bolt in with swing outs/belt loops/crotch strap bracket - 550
trac-linc - 360
|
|
| Top |
|
|
85z28
|
Post subject: Posted: Thu Jun 03, 2004 10:01 pm |
|
Joined: Sun Jan 11, 2004 4:34 pm
Posts: 548
Location: Atlanta, Ga
|
|
thanks I am trying to talk the wife into it. it would save me money on stuff I need anyways. you didn't say how much you wanted for the drive shaft. but the wife doesn't sound like she gonna let me spend the money at this time. I will see what i can talk her into.
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Tue Jun 15, 2004 7:11 am |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
|
Got the VC's thanks! Check your PM I sent ya and get back w/ me.
|
|
| Top |
|
|
Daddy
|
Post subject: Posted: Tue Jun 15, 2004 11:03 am |
|
Joined: Mon Aug 25, 2003 5:59 pm
Posts: 2334
Location: Little Rock Arkansas
|
|
How are the headers? And a price
_________________
I wake up in the morning and piss excellence!
 
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Tue Jun 15, 2004 12:44 pm |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
They are the same headers I run. See I told ya you should've looked underneath but nah......see what I tell ya? Hard head make for a soft ass you'll listen one day. 
|
|
| Top |
|
|
JackZ28
|
Post subject: Posted: Tue Jun 15, 2004 3:05 pm |
|
Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
|
That is a sweet setup Jason. It looks really high quality. I looked under his car, so I saw what it was like! Naneenaneebooboo! 
_________________
http://www.myspace.com/jackster31b
|
|
| Top |
|
|
Daddy
|
Post subject: Posted: Tue Jun 15, 2004 4:53 pm |
|
Joined: Mon Aug 25, 2003 5:59 pm
Posts: 2334
Location: Little Rock Arkansas
|
|
Biatches!
_________________
I wake up in the morning and piss excellence!
|
|
| Top |
|
|
JackZ28
|
Post subject: Posted: Wed Jun 16, 2004 5:57 am |
|
Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
|
|
| Top |
|
|
CandyMan
|
Post subject: Posted: Fri Jun 18, 2004 7:20 pm |
|
Joined: Sun Jun 06, 2004 10:09 pm
Posts: 701
Location: Nuremberg
|
|
Hey,
where's Rob?
I've messaged him bout some parts a couple of days ago, but he didn't answer yet...
_________________
=--------------------------------------------> Camaro Pix <-------------------------------------------=
|
|
| Top |
|
|
Daddy
|
Post subject: Posted: Fri Jun 18, 2004 8:33 pm |
|
Joined: Mon Aug 25, 2003 5:59 pm
Posts: 2334
Location: Little Rock Arkansas
|
|
Rob? You there?
_________________
I wake up in the morning and piss excellence!
|
|
| Top |
|
|
guerardsgt
|
Post subject: Posted: Tue Jun 22, 2004 11:04 pm |
|
Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
|
|
I glad I read this because I was going to buy a set of those valve covers not even realizing they wouldn't fit with my pro mags rr. How much do you want for the MSD 6al ignition box? and the torque arm?
|
|
| Top |
|
|
RobH
|
Post subject: Posted: Tue Jun 29, 2004 9:22 am |
|
|
| Senior Member |
|
|
Joined: Wed Apr 23, 2003 2:48 am
Posts: 399
Location: Lawton, Ok
|
|
Sorry about the missed msg's, I've been on leave, and just got in tonight. I'll do some catching up and get back with you guys tomarrow.
I replied to your PM John, and Jack I sent you one before I left, and I didnt get your latest. ??? dunno why my account is acting all fritzy.
...its been 21 days and 5200 miles, I'm going to sleep. talk to ya later
|
|
| Top |
|
|
RobH
|
Post subject: Posted: Wed Jul 07, 2004 3:23 pm |
|
|
| Senior Member |
|
|
Joined: Wed Apr 23, 2003 2:48 am
Posts: 399
Location: Lawton, Ok
|
Just want to put this thread to a end. Thanx for the interest.
John, got the check, thanks and I hope they work out for you.
Jack if you see this before we talk again, I didnt get your pm, and I dont think mine are getting thru.
I'm gonna delete my posts on this thread in the next day or to, because I dont want somebody 3 years from now asking about something 
Daddy, I'm gonna get with you about the headers.
|
|
| Top |
|
|
JackZ28
|
Post subject: Posted: Sat Jul 10, 2004 9:18 pm |
|
Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
|
|
| Top |
|
|
Rampage
|
Post subject: Posted: Tue Jul 13, 2004 2:56 pm |
|
Joined: Tue Oct 02, 2001 12:56 am
Posts: 618
Location: Vilnius/ Munich / Dubai
|
|
Update please!
What is still for grabs and what has been sold?
Greetz,
R@M
_________________
~ Memories are the only paradise where you can NOT get kicked out ~
Well, I ran out of F-Bodies - till 2010 - if there still is GM
Got boost?
|
|
| Top |
|
Who is online |
Users browsing this forum: No registered users and 4 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
