F-Body Europe


It is currently Thu Jun 26, 2025 10:36 am

All times are UTC + 1 hour





Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: ASP under drive pullies w belts
PostPosted: Mon Jun 23, 2003 7:05 am 
Offline
Site Admin
User avatar
 Profile

Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
I have the ASP underdrive crank 25% underdrive and altenator pulley another+10% for just altenator with gator back belts 2 ea one for the alt and WP and one for the AC pump. power gains are about 10 hapees but saves where you save wear and tear on acc with this. I paid almost 300 - shipping for the complete set up. I would like to get $190 for it.


Top
 

 Post subject:
PostPosted: Mon Jun 23, 2003 7:16 am 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
Hey Bruce, add that to my tab.. Send 'em to me and I will send you $390 when I get back from Southern France. I leave tomorrow.

I found a broken spring, so that was probably the culprit. Are those the stock lifters you sent me? They look way better than the ones I had.. Totally different..

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Mon Jun 23, 2003 7:35 am 
Offline
Site Admin
User avatar
 Profile

Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
OK. So it was a spring that could a been a 30 min job. Jack replace that one only spring only I will send ya another set of used 941 4ea broken and call katech he will send you a new set get the CC 918 They are alot better this will get you up and running until the 918 get here. BTW tell them you need 16 steel retainers. Any questions call me DSN 475 8162 or 09662-83 8162.


Top
 

 Post subject:
PostPosted: Mon Jun 23, 2003 7:37 am 
Offline
Site Admin
User avatar
 Profile

Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
They are 01 OEM with about 10,000 miles on them.


Top
 

 Post subject:
PostPosted: Mon Jun 23, 2003 8:23 am 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
I don't know for sure if that was the problem, but if it was, I admit that I am AN IDIOT.. :) Oh well, those lifters you sent me are at least 10 times better, so I don't feel too bad about it.. :oops: :oops:

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Mon Jun 23, 2003 9:07 pm 
Offline
No Life
User avatar
 Profile

Joined: Mon Apr 08, 2002 9:07 pm
Posts: 841
Location: Ramstein AB, Germany
Sounds like the car isn't for sale now. That is good. I would hate to see you sell it. When will you have it running? Let me know when you are ready to go out cruising.


Top
 

 Post subject:
PostPosted: Mon Jun 23, 2003 9:43 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
I got one head on so far. When I get back from Southern France, I will finish it, and I will cruise with you Jerry..

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Tue Jun 24, 2003 7:13 am 
Offline
Site Admin
User avatar
 Profile

Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
good luck give me a call if you get stuck.


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits