F-Body Europe

Hawk · **Posted:** Wed Nov 12, 2003 8:20 am

Used Comp Cam Extreme R 224/228 Dur 581/588 lift on a 114 LSA ($200)
Custom program for above cam ($100)
Used Wolf 6 pt roll bar Bolt in. ($700)
Complete stock LS1 rotating assembly with ARP rod bolts. ($100)
Used LS1 heads ($150)
New Venom Nitous VCN 1000($550)
New Comp Cam blue stripe 918 valve springs ($100)
used Chassis engineering solid tq arm with safety loop ($150)
used 5pt RCI harnnes ($35)
Dynatech ceramic coated Long tube LS1 headers ($200)
used LS6 intake ($300)
Used ASP underdrive pullies with belts. ($150)
Used LS1 rocker arms ($50)
Comp Cam chrome moly 7.350 push rods($75)

Some parts are ready for shipment some are still on or in the car. I will be starting the upgrade around christmas. Prices are negotiable.
I am getting to Hawk ready for the states so I will be turning up the RPM's to 7500. I ran the above setup to 7000 with the 918 springs.

SRZ · **Posted:** Wed Nov 12, 2003 8:58 am

Damn Bruce what ya got up your sleeve?

Selling some key components from the Hawk and 1 item has really got me wondering what's next.

JackZ28 · **Posted:** Wed Nov 12, 2003 6:09 pm

I'm interested in the pushrods, intake, pulleys and the springs. Make me an offer. :twisted:

Garry · **Posted:** Wed Nov 12, 2003 6:26 pm

Bruce, are you going V6 for the Hawk? :lol:

predator · **Posted:** Wed Nov 12, 2003 7:36 pm

are the heads off already i may be interested in those

JackZ28 · **Posted:** Wed Nov 12, 2003 8:27 pm

You working on a LS1, Predator? You probably know those heads won't work on a LT1, but if not, they won't..

predator · **Posted:** Wed Nov 12, 2003 8:33 pm

i have a 98 rolling chassis in florida with a moser and t-400 i bought it off my bud for 3000 he fragged the motor racing just wanted money to put down on a z06 so i bought it for 3000 looking to build the motor maybe get them ported

predator · **Posted:** Wed Nov 12, 2003 8:34 pm

i am also looking for an ls1 block it has a rod stuck through the side of it

Garry · **Posted:** Wed Nov 12, 2003 8:35 pm

Ouch ... guess it'll make a good paper weight

predator · **Posted:** Wed Nov 12, 2003 8:40 pm

yeah he was spraying like 300 i think or some crazy "He said POOP" like that and somehow the cam broke then the intake filled up with a nice mix of nitrous and fuel then the next cylinder fired and well i guess you can get the picture so the whole upper end was fragged along with the bottom blew the hood right off he was running high 11 n/a i think low 10s with spray so i also need a hood

Garry · **Posted:** Wed Nov 12, 2003 8:45 pm

300 shot? He was asking for it I guess ...

predator · **Posted:** Wed Nov 12, 2003 8:51 pm

it was built for it though just the cam broke and destroyed it he wanted 5000 but i waited him out for 5 mnonths and when he came across a good deal on a z06 he sold out

Hawk · **Posted:** Thu Nov 13, 2003 8:38 am

Heads are off do you wont the rockers both for $200. Jack I sent you mail

Black99SuperSport · **Posted:** Thu Nov 13, 2003 11:09 am

I may interested in the headers do you have a y pipe or know of a good place to get one? you can e mail me at black99supersport@yahoo.com or call me at home 06333-99-3653. . . . . my answering machine is in German just a heads up.

JackZ28 · **Posted:** Fri Nov 14, 2003 7:14 am

Did you buy Dan's SS 97? Or is yours the one with chrome rims?

JackZ28 · **Posted:** Fri Nov 14, 2003 2:37 pm

Bruce, send your email to jackdub@rocketmail.com or send it to my military account. THX

Black99SuperSport · **Posted:** Mon Nov 17, 2003 11:55 am

Yes I bought dan's at the end of August took it to bitburg in Sept. and Oct.

JackZ28 · **Posted:** Mon Nov 17, 2003 12:20 pm

Cool, that's a really sweet ride!

395stang · **Posted:** Tue Nov 18, 2003 4:57 pm

Is that nitrous system just for the LS1 Or can it be adapted to any car? Might be interested in going with nitrous on my other stang. Just to try it out might like it.

predator · **Posted:** Tue Nov 18, 2003 5:43 pm

do you take paypal for the heads

F-Body Europe

Some Kewl New/Used Parts

Who is online