|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 8 posts ] |
|
Author |
Message |
Mac
|
Post subject: LS1 Posted: Sun Feb 22, 2009 4:48 pm |
|
|
Cool Newbie |
|
Joined: Mon Dec 31, 2007 4:40 pm Posts: 17
|
I have a LS1(dissambled) that I'm looking to get rid of. This is the story behind it. The initial plan was to put it in a Chevy S-10. that plan fell threw and the engine got pushed off on me. It sat in my garage for months before I finally decided to do something with it. I took the heads off and had a local machine shop hotwash them and check them out. The heads ware good. I have a brand new cam and springs(specs listed below) that i was going to put in, which is were I'm at now. Unfortunately, I was notified that I've been assigned to a transition team downrange and I leave in April. So I'm not going to have any time to fool with this. As a stated earlier, the engine is stripped down to the block, crank, and cam, but I have all the parts(minus the electrical stuff). It would be a good engine for anyone looking for a project or parts. I actually wanted to take it back with me but I'm already paying out of pocket to ship another car and motor and the wife says no. I'm open to any reasonable offers. I just need to clear out my garage.
CAM SPECS LS1 3706R/3717R HR13
ADV DUR: 287 281 DUR@ .050: 234 228 LOBE SEP: 113.0 VALVE LIFT .576 .571 ADV
|
|
Top |
|
chieftransam
|
Post subject: Re: LS1 Posted: Sun Feb 22, 2009 5:16 pm |
|
|
Senior Member |
|
Joined: Mon Dec 03, 2007 2:59 pm Posts: 378 Location: Spangdahlem, Germany
|
any photos?
_________________ 01 TA-M6-Blue ****It's for sale!! Make me an offer!!****
|
|
Top |
|
Mac
|
Post subject: Re: LS1 Posted: Sun Feb 22, 2009 5:51 pm |
|
|
Cool Newbie |
|
Joined: Mon Dec 31, 2007 4:40 pm Posts: 17
|
I will check my camera. I may have a few on there.
|
|
Top |
|
Chevroletfreak
|
Post subject: Re: LS1 Posted: Sun Feb 22, 2009 7:05 pm |
|
|
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Hey Mac. Can you PM me with a price that you are looking for? If it is cheap enough I may slap it in mine until the build is done.
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
jeejee
|
Post subject: Re: LS1 Posted: Sun Feb 22, 2009 9:31 pm |
|
Joined: Fri Sep 09, 2005 10:02 am Posts: 658 Location: the Netherlands
|
some pics would be nice...
is this the same engine you had on sale some time ago ?
_________________
if you're not breaking parts , you are not making enough power When in doubt, increase boost !
|
|
Top |
|
Mac
|
Post subject: Re: LS1 Posted: Mon Feb 23, 2009 9:06 pm |
|
|
Cool Newbie |
|
Joined: Mon Dec 31, 2007 4:40 pm Posts: 17
|
jeejee wrote: some pics would be nice...
is this the same engine you had on sale some time ago ? No, that one was put in a '95 Camaro.
|
|
Top |
|
Chevroletfreak
|
Post subject: Re: LS1 Posted: Tue Feb 24, 2009 8:28 am |
|
|
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Where is it located and how much?
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
jeejee
|
Post subject: Re: LS1 Posted: Wed Feb 25, 2009 2:50 pm |
|
Joined: Fri Sep 09, 2005 10:02 am Posts: 658 Location: the Netherlands
|
any updates ?
_________________
if you're not breaking parts , you are not making enough power When in doubt, increase boost !
|
|
Top |
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
| |