 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
slimm
|
Post subject: gears  Posted: Wed Aug 28, 2002 11:25 pm |
|
Joined: Wed Aug 28, 2002 11:19 pm
Posts: 2
Location: fall river /mass/us
|
|
I want to put a cam in my 95 z28 but want to use the factory chip what kind of cam can I bye.how much horse power gain will I get and how to put it in.
|
|
| Top |
|
|
sven
|
Post subject: sven it's sven. 93 LT-1 Auto Posted: Wed Aug 28, 2002 11:39 pm |
|
Joined: Mon May 13, 2002 2:37 pm
Posts: 612
Location: Renton, Washington, United States
|
|
check with hawk or ss396.
_________________
1999 GM LS-1 T/A
2005 Suzuki GSX-R 1000
|
|
| Top |
|
|
Hawk
|
Post subject: Posted: Thu Aug 29, 2002 6:35 am |
|
Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
|
|
Jon or my96z are the SME with LT1's
|
|
| Top |
|
|
My96z
|
Post subject: Posted: Fri Aug 30, 2002 5:19 pm |
|
Joined: Sun Jul 22, 2001 5:14 pm
Posts: 646
Location: Landstuhl, Germany
|
|
SLimm...
I have to hotcam kit in mine, now I may seem partial but its the best bang for the buck out there(ask these guys how my car runs:P). I paid like $500 and You get just about everything you need except seals, timing chain. You may also need different push rods, some do some dont. But you get 1.6 full roller rockers, springs, retainers the works. It will work good with stock heads and will run on the stock program, but as with anything will run better with a custom tune.
Other ones that will work with stock heads are the CC305, and if you really wanna go docile you can look into the LPE211/219 cam. It made to work with STOCK program.
On the hot cam look for a 30-40 HP gain, more with a tune. The cam change is not for the faint of heart so unless you know what you are doing shop around for a QUALITY facility.
Have any more questions, just post
Jeff
Last edited by My96z on Fri Aug 30, 2002 5:22 pm, edited 1 time in total.
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 14 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
