F-Body Europe


It is currently Thu Mar 28, 2024 1:09 pm

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Drag motor of interest.
PostPosted: Tue May 15, 2007 12:17 pm 
Offline
No Life
User avatar
 Profile

Joined: Tue Jul 12, 2005 5:08 pm
Posts: 942
Location: Fort Bliss, Texas
Just thought I would post this here to see if there is interest. I have no idea who the person is.

usually i would not put something like this on this site but i figured why not. I need this gone and someone may know someone that may want it.


Item Description -632 C.I. Pontiac/ Oldsmoble full race eng
Asking/Offering Price -see below
Email Address -jimibanda@yahoo.com
Your Location -San Antonio
Pics (if available) -on request, serious buyers only


Here is all the specs on it

632 cubic inch Pontiac/Oldmoble
New Donovan 4.600 bore block- 0 runs 0 dyno pulls
Bryant 4.750 crank
New Brooks Rods
New JE Pistons And pins-16.3 comp ratio
Smith Bros. push rods
Comp lifters
CamMotion Cam .860 Intake .810 Exhaust 288 & 308 degree at .050
114degree intake lobe center
sheetmetal 2 dominator intake w/ burst panels
manifold plumbed rear to front water lines
manifold plumbed for twinfogger
2qft dominators w/billet metering blocks (1150's)
14degree Brodix Heads 2.450 intake and 1.88 exhaust valves (Titanium)
new comp 948 springs
Jesel Rocker system and timing belt system
Heads ported by Lozano bro. porting 481 cfm intake and 320 exhaust
Moroso valve cover
3 stage drysump system
MSD front mount distributor
MSD crank trigger
ATI harmonic balencer
Moroso drysump pan
Nitrous systems and fuel system available (with tune)

this engine before the rebuild and new block dyno at 1182hp to the crank before nos....Can handle 600 shot of nos 3 stage.

this is a great engine. but my shop is building up a bigger one so this one is just gathing dust at the shop.

Serious buyer only please.
18,000 is the asking price on this bad boy...and thats good considering the rebuild alone goes about 10 grand..this is a 37000 dollar motor easily.


Image

_________________
2001 Ford Focus sleeping in Germany
04 Focus ST170 Clone in USA
2010 Renault Clio 1.2 16V in Germany
2013 Focus ST250 in the USA
1st car 77 Camaro Type Lt 5.0 auto


Top
 

 Post subject:
PostPosted: Tue May 15, 2007 12:25 pm 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
What's the mpg ? :D :lol:
Sounds nice ... 1100HP and a 600 shot ... phew ... ;)

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject:
PostPosted: Tue May 15, 2007 1:20 pm 
Offline
Senior Member
User avatar
 Profile

Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
That would be nice.

_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)

2000 WS6 RIP


Top
 

 Post subject:
PostPosted: Tue May 15, 2007 3:08 pm 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
Hmmmmm. That gives me an idea for the mini :twisted:


Top
 

 Post subject:
PostPosted: Tue May 15, 2007 5:53 pm 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
:lol: Are you getting into space travel business?

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject:
PostPosted: Mon May 21, 2007 9:45 pm 
Offline
Senior Member
User avatar
 Profile

Joined: Fri Sep 09, 2005 10:02 am
Posts: 658
Location: the Netherlands
if thats the boat anchor in your basement , i'll might increase my bid of $500 somewhat :shock:

_________________
Image Image

if you're not breaking parts , you are not making enough power
When in doubt, increase boost !


Top
 

 Post subject:
PostPosted: Wed Jul 11, 2007 12:37 pm 
Offline
Senior Member
 Profile

Joined: Tue Jun 20, 2006 6:57 pm
Posts: 359
Location: Stuttgart, Germany
danm look at the stroke its got.


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits