F-Body Europe


It is currently Sun Jun 22, 2025 11:52 pm

All times are UTC + 1 hour





Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Want a dyno tune?! Here's your chance!
PostPosted: Wed Jun 09, 2004 8:24 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
The people on MM are in the process of having Superchips come from Tampa Fl to here for a dyno session for 2 days. The more cars the less the fee for a custome burned ECM/Chip LT1/LS1. Non-refundable and slotted for the end of AUG time frame early Sept. Price is still out there because of the amount of people. Can be anywhere on the high end of 500-600 or low end of 300-400. Still inexpensive considering THEY are getting someone over here to do this. Top tuner in the Mustang community as well and they do all makes. For details see the link. I'm the only one from here participating. For you modded guys running mail order programs this could be your chance.

See link for details. http://forums.mightymustangs.net/index.php?showtopic=1324

_________________
The "SRZ"
750rwhp, limited to 55mph flyby's in the US.

02' MY Z06, Cam, LT headers, X-pipe, Breathless CAI, Borla Stinger exh, RSD short shifter, Elite catch can, C6Z susp, CCW classic's 18x10 & 18x12...your normal everyday Z06.


Top
 

 Post subject:
PostPosted: Wed Jun 09, 2004 1:33 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
I thought they said 50-75? If it's in the hundreds, consider me out! :shock:

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Wed Jun 09, 2004 1:55 pm 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
Don't know what planet you are from. :) Price a dyno tune in the states w/ wide band. Some places are even higher than the ones listed here. Only way it'll ever be that cheap is if we had a 100 people committed. And we know that isn't happening. Those prices are reasonable esp considering OUR location.


Top
 

 Post subject:
PostPosted: Wed Jun 09, 2004 2:45 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
You're probably right John, but I don't feel like paying someone that much money to make the car run a little better. I think it's fine. I raised the idle a bit, and adjusted the air/fuel, so I'm quite happy with it right now.

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Wed Jun 09, 2004 6:40 pm 
Offline
No Life
User avatar
 WWW  Profile

Joined: Mon Feb 24, 2003 11:17 pm
Posts: 1082
Location: Giebelstadt
:shock: Is this for real??? That's great! Too bad that it's the rustangs initiating it. Then again after getting stomped every time at Bitburg they need all the help that they can get... :twisted: Question is, can they do it all in only 2 days? BTW, the going rate is about $550 for a dyno tune. But it takes some time, seems like if they're only here for a few days, they'll be rushing it... If I was still here, I'd do it.
One other thing, are they bringing a dyno or is there one available? Warning to all those with automatics, the Germans won't put your car on a dyno. At least not the ones up this way. :x

_________________
1996 SS-Z28
1957 Chevy P/U project
2000 Dakota
http://members.cardomain.com/dumaisk
http://community.webshots.com/album/113580439DwJndn/0
Yes, I'm a caraholic.


Top
 

 Post subject:
PostPosted: Wed Jun 09, 2004 7:38 pm 
Offline
Senior Member
User avatar
 Profile

Joined: Wed Apr 24, 2002 8:03 pm
Posts: 692
Location: Erdorf, Germany
SSZ28 wrote:
Warning to all those with automatics, the Germans won't put your car on a dyno. At least not the ones up this way. :x


What's up with that? Have you ever asked why and what is the difference?

As far as the dyno, go to the MM page that John posted and towards the end of that thread is an explanation of a possible dyno facility.

_________________
Best 1/4: 13.587 @100.90mph


Top
 

 Post subject:
PostPosted: Thu Jun 10, 2004 6:27 am 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
They told me it would be $450.

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Thu Jun 10, 2004 6:48 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
Well like I said I don't know the price just a ball park figure so no one doesn't go into shock. That's a really good price too. Can't wait.


Top
 

 Post subject:
PostPosted: Tue Jun 15, 2004 10:05 am 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
Screw it man, I'm gonna do it. This is good opportunity, and I don't really want to miss it. ;)

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Tue Jun 15, 2004 10:41 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
Hope we can get some other takers. If some of you are heads and cam w/ mail order tune this would be perfect.


Top
 

 Post subject:
PostPosted: Tue Jun 15, 2004 10:57 am 
Offline
Needs a Job
User avatar
 YIM  Profile

Joined: Mon Aug 25, 2003 5:59 pm
Posts: 2334
Location: Little Rock Arkansas
I would do it in about 2 months, but really no need right now

_________________
I wake up in the morning and piss excellence!
ImageImage


Top
 

 Post subject:
PostPosted: Tue Jun 15, 2004 11:52 am 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
It's probably gonna be some time in September!

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Thu Jun 24, 2004 7:41 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
The dates will be confirmed tomorrow. Man if ANY of you guys are serious you need to go over to their board and contact 1BAD90GT for payment. This CANNOT BE DONE W/OUT Participation!

3-4 Sep alt 1-2 Oct w/ possible mid wk dyno session if we get alot of people. Please go check this out!


Top
 

 Post subject:
PostPosted: Tue Jun 29, 2004 5:59 am 
Offline
Member
User avatar
 WWW  Profile

Joined: Fri Apr 04, 2003 6:59 pm
Posts: 118
Location: Heidelberg
This sounds promising. I may be up for another tune as well by that time, after I get my new AFR heads installed. This place in Switzerland has a dyno and uses LS1 edit to do the tune. it is about 2-3 hours from Heidelberg, but it is the only place I have found that can do both a chip tune and dyno at the same time, price is about 800 Euro though!! Way too expensive, but the only choice I have found so far. Where is the dyno located in Germany?

http://www.heinzroth.com/portrait.htm

_________________
04 LS6 block, random tech high flow cats, Vararam air intake, LAPD carbon fiber power duct, C6 Z06 shifter, RD motorsports crossbar & 5 Point Harness, GM T1 sway bars, 04 Sachs shocks, Movit brakes, carbon fiber high rise hood, magnason blower


Top
 

 Post subject:
PostPosted: Tue Jun 29, 2004 6:17 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
Nick I don't know exactly the location. I'd have to look on Mighty Mustangs for the location. 800 euro?! You aren't kidding that's a whole lot of $$. If you are seriously interested check the link and get with Phil aka 1BAD90GT. He can provide all the answers you need. Or Nazman.


Top
 

 Post subject:
PostPosted: Tue Jun 29, 2004 6:31 am 
Offline
Member
User avatar
 WWW  Profile

Joined: Fri Apr 04, 2003 6:59 pm
Posts: 118
Location: Heidelberg
SRZ,

Cool. Thanks for the reply. I will follow the link and check out the particulars and contact him. The price is way better than the shop in Switzerland. Hey when is the next Bitburg races? I will see if I have a car left after the Vette/ Viper shootout at Hockenheim ( http://www.scci.ch ) and would like to 1/4 mile it to see what she's got. Have not done a run yet, mostly road racing and high speed autobahn chases.

Thanks,

Nick

_________________
04 LS6 block, random tech high flow cats, Vararam air intake, LAPD carbon fiber power duct, C6 Z06 shifter, RD motorsports crossbar & 5 Point Harness, GM T1 sway bars, 04 Sachs shocks, Movit brakes, carbon fiber high rise hood, magnason blower


Top
 

 Post subject:
PostPosted: Tue Jun 29, 2004 7:09 am 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
1on1 Bitburg is on the same weekend ... just two days of action instead of one ... ;) Next date after that is July 31/August 1 ...

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits