|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 9 posts ] |
|
Author |
Message |
IROC
|
Post subject: 30.Oct Dyno Day in Munich Posted: Mon Oct 16, 2006 7:31 pm |
|
Joined: Sat Aug 04, 2001 12:41 pm Posts: 570 Location: Nuremberg, Germany
|
Anybody interested in the Dyno Day Event in Munich on Oct. 30th 2006 ? The german corvette forum has the dyno available the whole day long….. afterwards they cruise out to a an american diner in Paffenhofen (Autobahn A9) for some steak & ribs… it’s organized by the vette forum but of course all fbodys are very welcome…. Any takers ?
-Alex
For all of you familiar with german… Corvette Dyno Day
_________________
|
|
Top |
|
Garry
|
Post subject: Posted: Mon Oct 16, 2006 7:47 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Tempting, but without having anything modified, it's not really that interesting ... rather wait till next year ... that way, I can do some finetuning at the same time ...
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
572ysc
|
Post subject: Posted: Mon Oct 16, 2006 7:56 pm |
|
|
Senior Member |
|
Joined: Tue Jun 20, 2006 6:57 pm Posts: 359 Location: Stuttgart, Germany
|
Wish the V8 was already built but when its finished the dyno is gonna because of the power. (hahaha)
|
|
Top |
|
IROC
|
Post subject: Posted: Mon Oct 16, 2006 8:24 pm |
|
Joined: Sat Aug 04, 2001 12:41 pm Posts: 570 Location: Nuremberg, Germany
|
Garry wrote: Tempting, but without having anything modified, it's not really that interesting ... rather wait till next year ... that way, I can do some finetuning at the same time ...
Would be a good chance to get a few before and after results
_________________
|
|
Top |
|
Garry
|
Post subject: Posted: Mon Oct 16, 2006 8:25 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
True, but the "before" is probably pretty much stock
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
572ysc
|
Post subject: Posted: Tue Oct 17, 2006 5:49 am |
|
|
Senior Member |
|
Joined: Tue Jun 20, 2006 6:57 pm Posts: 359 Location: Stuttgart, Germany
|
So is the dyno free to use? Since it is for the vette guys the whole day. Just asking.
|
|
Top |
|
IROC
|
Post subject: Posted: Tue Oct 17, 2006 9:05 am |
|
Joined: Sat Aug 04, 2001 12:41 pm Posts: 570 Location: Nuremberg, Germany
|
572ysc wrote: So is the dyno free to use? Since it is for the vette guys the whole day. Just asking.
No, definitely not free... they rented it for the whole day... last time they charged about €50 per run, at least that's what I heard... this time should be similar.
_________________
|
|
Top |
|
SRZ
|
Post subject: Posted: Wed Oct 18, 2006 10:46 am |
|
Joined: Sun May 27, 2001 3:42 pm Posts: 3430 Location: FL
|
Take pics and vids. Wish I could come but that's a work day for me. Have fun!
|
|
Top |
|
98 T/A raptor
|
Post subject: Posted: Wed Oct 18, 2006 2:46 pm |
|
Joined: Tue Aug 17, 2004 11:24 am Posts: 501 Location: sembach germeny
|
SRZ wrote: Take pics and vids. Wish I could come but that's a work day for me. Have fun!
Same hear
_________________ 98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
Top |
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
| |