 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 8 posts ] |
|
| Author |
Message |
|
NXZ28
|
Post subject: Winter Mods  Posted: Mon Dec 18, 2006 6:05 pm |
|
Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
|
|
Like the topic says, what are you all planning as far as upgrades this winter? Mine is currently on the way home. If I don't go play in the sand again I plan on a few upgrades.
1. Magic Stick 4 Cam from Texas Speed
2. Fully ported Trick Flow Heads
3. Ford 9" rearend
4. Chromoly K-Member with upper and lower control arms
5. 10 point roll cage
6. TH400 tranny with transbrake
7. Second stage of nitrous with a plate kit
8. Send the Fast 90mm intake off to get ported
That is about it. I want this car to run mid to low 9's on a good track. More safety upgrades will come as the car progresses towards my goals.
_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
| Top |
|
|
Daddy
|
Post subject: Posted: Mon Dec 18, 2006 6:14 pm |
|
Joined: Mon Aug 25, 2003 5:59 pm
Posts: 2334
Location: Little Rock Arkansas
|
|
383ci stroker w/11.8-1 cr
Custom grind cam from Lloyd Elloit
Ported Trick Flow heads from Lloyd Elliot
The Viper internal T-56
Strange Dana 60 w/3.73's
Tires for my Weld Drag lites
NX Nozzle kit for 180hp shot
And a 10 sec time slip!
_________________
I wake up in the morning and piss excellence!
 
|
|
| Top |
|
|
ringram
|
Post subject: Posted: Mon Dec 18, 2006 6:39 pm |
|
Joined: Sat Nov 12, 2005 11:36 am
Posts: 51
|
|
402 SDPC Alloy block -14cc diamond pistons.
Fast90 intake
NW 90 mm throttlebody
LS7 clutch kit
Will swap my dart 205's onto it and dump my LS6 intake and TB.
Hoping for around 450+rwhp and similar torque.
_________________
-----------
efilive distributor for europe
richard(at)efilive.eu www.efilive.eu
2007 HSV R8 Clubsport LS2 M6, 7.2L, WCCH 400cfm LS7, Comp 227/243-113, Darton Block, Callies, Diamond, ACT Twinplate, 605ftlb, 625bhp
|
|
| Top |
|
|
ChrisV6
|
Post subject: Posted: Mon Dec 18, 2006 7:24 pm |
|
Joined: Sat Oct 13, 2001 4:53 pm
Posts: 1041
Location: Erlangen <=> Coburg
|
Hmmm....
-Get after 7 months finally a german registration for the convertible 
(= bolt in those four H4 headlamps, wire up the rear fog light, put
2 extra fuse boxes into the rear lights, remove the annoying SES light
caused by the 3" cat... and find a TÃœV guy who accepts that a firebird convertible is 99% the same car as a camaro convertible...)
-Pull the engine & trans from the yellow one and check what fits in there
-Bolt a throttle body, air cleaner and exhaust on the 90% finished GTZ and fire it up finally...
_________________
2001 Pontiac Firebird Convertible 3.8l V6 - daily cruiser
1994 Pontiac Firebird 3.4l V6 - new engine one the way
1990 Chevy Beretta GTZ, back on the road in the year 2057
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Tue Dec 19, 2006 4:56 am |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
G-Force tranny and a 9"........possibly a cage but we'll see. Oh and a hill........something for me to push the car to get moving. Don't need any of it right now but I'd like to have a backup. 
Last edited by SRZ on Tue Dec 19, 2006 9:25 am, edited 1 time in total.
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Tue Dec 19, 2006 6:18 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
|
BenZ28
|
Post subject: Posted: Tue Dec 19, 2006 1:15 pm |
|
Joined: Mon Sep 10, 2001 3:53 pm
Posts: 2485
Location: Mainz, Germany
|
Brake pads and rotors. 
Ben
_________________
1999 Camaro Z28, black, T-Tops, M6
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Tue Dec 19, 2006 2:32 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
|
Dito on the brakes ... and some other small parts ...
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
