F-Body Europe

edcmat-l1 · **Joined:** Wed Jan 16, 2008 11:32 pm **Posts:** 74

Just finishing up our latest. 99 C5. Heres the specs.
403 LS2
Eagle rotating assembly
11.5ish to 1 comp
Proprietary cam (big but not huge)
Caddy lifters
CM 5/16 pushrods
11 degree heads
FAST 90 ported in house
ported LS2 throttle body
yella terras
KOOKS 1 7/8s headers
ATI balancer
Aluminum flywheel
RAM dual disc
No EWP
3.42 gears
Stock wheels
TPIS mufflers
This was on the second pull. I know it says run 17 and up, but its a customers car that we had dynoed before, we're still on the same run file. It made 510 on the first pull. Hasnt even been broke in yet.
This vehicle is an on going experiment in cam design, as well as some other goodies.
For instance, we've come up with a combo to run yella terras on the ETP and RHS heads. With virtually PERFECT geometry. If anyone is interested gimme a pm.
Special thanks goes out to my good buddy Shane from Precision Systems, out of New Mexico.

edcmat-l1 · **Joined:** Wed Jan 16, 2008 11:32 pm **Posts:** 74

idle vid
http://www.youtube.com/watch?v=HAVQMmmiqQo

edcmat-l1 · **Joined:** Wed Jan 16, 2008 11:32 pm **Posts:** 74

Video of a couple pulls
http://www.youtube.com/watch?v=w2_ndpxl-hY

Roy · **Posted:** Sun Feb 24, 2008 4:48 pm

Impressive to say the least.

Lancer033 · **Posted:** Sun Feb 24, 2008 11:54 pm

not the same car, but these are 2 of the cars I mentioned in the other thread in front of Ed's shop from the Saturday I was up there.

BenZ28 · **Posted:** Mon Feb 25, 2008 10:31 am

Impressive, indeed!

edcmat-l1 · **Joined:** Wed Jan 16, 2008 11:32 pm **Posts:** 74

BenZ28 wrote:

Impressive, indeed!

Thanks guys. I'm binging a similar engine over for one of my customers. Ita a L92/L76 set up though. We are going to be selling these in different packages. Everything from emissions friendly smooth idle, to solid roller race only.

Garry · **Posted:** Mon Feb 25, 2008 2:27 pm

Btw, what other motors would you be able to do? I don't have anybody in particular, but I've been letting people know about the tuning, and some might have older motors than LT/LS series ... also, what motors do you do for Ford folks?

Btw, any word on the dyno cost yet?

Oh, the current state of my motor will hopefully change in time ... see below

edcmat-l1 · **Joined:** Wed Jan 16, 2008 11:32 pm **Posts:** 74

Garry wrote:

Btw, what other motors would you be able to do? I don't have anybody in particular, but I've been letting people know about the tuning, and some might have older motors than LT/LS series ... also, what motors do you do for Ford folks?

Btw, any word on the dyno cost yet?

Oh, the current state of my motor will hopefully change in time ... see below

WOW!! Thems alotta partses.

F-Body Europe

Our latest 403....532 rwhp/491 tq

Who is online