F-Body Europe


It is currently Sat Apr 27, 2024 11:37 pm

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Engine not firing LS2
PostPosted: Fri Mar 07, 2008 6:53 pm 
Offline
Cool Newbie
 Profile

Joined: Thu May 10, 2007 12:23 pm
Posts: 26
Location: Günzburg
Hey guys

I swapped a LS2 from a 05 GTO in my RX7 and have now completed the work. The problem is the engine just wont fire up. It will crank happily but I get no fuel and no spark. My wiring is done right I checked it many times and I get the switched constant 12V to the coils and the injectors its the pulsed signal that is totally lacking. I have Aeroforcetech OBD2 gauges hooked up to the OBD2 port and they show my all the engine stats. I get an RPM signal on cranking and it does some stuff with the fuel tables as I see it. The gauges also have a option to show DTCs but no faults show up.

Fuel Pump gets turned on an primered by the ECU and the fuel pressure is right at 58PSI.

Does anybody have an idea what it could be? I double checked on everything. Engine and is PCM are perfectly grounded. The switched and constant 12V sources are clean and all fused.


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Fri Mar 07, 2008 9:30 pm 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Sounds like VATS is interfering.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Fri Apr 25, 2008 9:48 am 
Offline
Senior Member
User avatar
 Profile

Joined: Fri Sep 09, 2005 10:02 am
Posts: 658
Location: the Netherlands
( Very Annoing Throttle Sensor) VATS ?

_________________
Image Image

if you're not breaking parts , you are not making enough power
When in doubt, increase boost !


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Fri Apr 25, 2008 10:35 am 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
I don't think it is VATS if the fuel pump is priming. I will have to look at my manual to confirm though.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Tue Apr 29, 2008 11:19 am 
Offline
Fast Newbie
 Profile

Joined: Tue Jul 24, 2007 2:21 pm
Posts: 54
Location: Stuttgart, Germany
Hey all -

It was VATS... he got it cleared with HP Tuners and is running... but now waiting on the car back from the paint shop.


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Tue May 06, 2008 7:36 pm 
Offline
Senior Member
User avatar
 Profile

Joined: Fri Sep 09, 2005 10:02 am
Posts: 658
Location: the Netherlands
anyone care to enlighten me what VATS actually stand for :?:

_________________
Image Image

if you're not breaking parts , you are not making enough power
When in doubt, increase boost !


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Tue May 06, 2008 8:25 pm 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
Vehicle Anti Theft System

If the key resistance is not recognized by the VATS module, the starter and fuel pump are disabled for 10 minutes.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Tue May 06, 2008 8:26 pm 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
How did HP Tuners clear a VATS problem though? Usually you have to clean the cylinder contacts to correct it.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Wed May 07, 2008 6:47 am 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
I guess what he meant is the VATS was disabled in the PCM ... in EFILive it's G1201 and G0801 ...

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject: Re: Engine not firing LS2
PostPosted: Wed May 07, 2008 9:26 am 
Offline
No Life
 Profile

Joined: Sat Mar 04, 2006 7:03 pm
Posts: 1007
Location: Oklahoma, USA
Ahhh.

_________________
My name is Brian and I have a SSickneSS

Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits