F-Body Europe

I need one of the bolts that hold the rear caliper to the caliper mounting plate. There are two of them and I have lost one and almost lost a second one!!!! I think the part number is 14067559 (M12-1.75X33.1). I am not sure of the part number just of where the little bastard goes.

Someone please assist!!!

TIA!
Larry

http://fbodyeurope.org/files/rcaliper.pdf - if you are talking about Part #14, your number should be right ... how can you lose those bolts? Guess you need to use more locktite

You should be able to source that bolt through Wuerth industries. There should be an outlet in your area.

Garry, the bolt appears to be used in a couple of different locations. That is not where I lost on, I lost it off the bracket the caliper itself bolts on to... As far as how did I loose it, well lets just say I obviously did not torque the little bastard down good enough. Live and learn, at least IT was found before there was a severe problem.

Roy, I will see if I can find them, I was just hoping someone on the forum had built a bench stock of nuts and bolts. I am learning, it is time to build a bench stock. I can't believe how fast the hardware on these cars goes TU... I have broke a few bolts this year doing new part installs (old ones of course).

I believe this is the part number I am looking for: 10112649

Here is the address and phone number

Wuerth Montage
Strasse / Nr.: KÖLNER STR. 10
PLZ / Ort: 70376 STUTTGART
Land DEUTSCHLAND
Telefon: (0711) 9557320

I don't know if they are a Gross handler or not. But if they are sometimes the wearing the uniform works to get what you need.

Thanks Roy,

I am going to remove the one off the passenger lower side and just say "I need one of these"