F-Body Europe http://forum.fbodyeurope.org/phpBB3/
LS1 MAF Anyone? http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=32&t=6621	Page 1 of 1

---

Author:	TurboManiacal [ Sun Jun 11, 2006 7:15 pm ]
Post subject:	LS1 MAF Anyone?
Looking to see if anyone has an LS1 MAF. Gonna call the dealership in Frankfurt to see if they have the part on hand as well.

---

Author:	NXZ28 [ Mon Jun 12, 2006 8:38 am ]
Post subject:
No post

---

Author:	ringram [ Mon Jun 12, 2006 9:20 am ]
Post subject:
I have what might be a Granatelli MAF from my 00 model LS1 Its like the stock one but ported and recallibrated. The guy I bought the car off told me it was this model anyway. http://www.granatellimotorsports.com/gm ... motive.htm I think its model 350112-C but not 100% sure. Was working fine before I removed it. I have gone to speed density tune and no longer require it. Yours for €95 shipped to you. Ill give you a 14 day warranty too as Im sure it works fine.

---

Author:	RTZSS [ Mon Jun 12, 2006 9:51 am ]
Post subject:
I got an 85MM SLP one I might be willing to let go.

---

Author:	Hawk [ Mon Jun 12, 2006 10:40 am ]
Post subject:
They changed the fuel curves in 01 so a MAF from a 00 will not work on a 04. It will run but will lack power.

---

Author:	ringram [ Mon Jun 12, 2006 12:04 pm ]
Post subject:
True, injector flow ratings changed Also maf calibration did change a little. Are you sure its not just the PCM that handles the change. The mafs might be interchangable!?

---

Author:	TurboManiacal [ Mon Jun 12, 2006 1:19 pm ]
Post subject:
Well car is back to normal and is behaving normally again...that was weird. Still going to try and pickup a Z06 MAF From Opel...so we'll see.

---

Author:	ringram [ Mon Jun 12, 2006 8:49 pm ]
Post subject:
Dump the MAF go open loop speed density

---

Page 1 of 1	All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/