Rotenburg/W.? Good luck with getting anything in that quickly ...
I take it most aftermarket heads will have the 99+ center bolt layout? Need to check the Patriot heads
| F-Body Europe http://forum.fbodyeurope.org/phpBB3/ |
|
| Need urgent rocker arm covers http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=32&t=7562 |
Page 1 of 1 |
| Author: | Jens [ Tue Jul 24, 2007 4:49 pm ] |
| Post subject: | Need urgent rocker arm covers |
I´m just putting new heads on my LS1. JPR Stage 2.5 HVLD Heads. Now i see, that i need other covers for the rocker arms. Who can help me? Here some pictures to see, what i mean! New Heads: http://fbodyeurope.org/Gallery/main.php?g2_view=core.DownloadItem&g2_itemId=5534&g2_serialNumber=1 Old Heads: http://fbodyeurope.org/Gallery/main.php?g2_view=core.DownloadItem&g2_itemId=5536&g2_serialNumber=1 |
|
| Author: | Roy [ Tue Jul 24, 2007 7:24 pm ] |
| Post subject: | |
Scoggins Dickey YOu will also need new coil pack brackets too. |
|
| Author: | Jens [ Wed Jul 25, 2007 6:50 am ] |
| Post subject: | |
i didnßt know, that there is a different between 1998 LS1 and >1999 LS1. So, does anyone have the covers from a >1999 LS1? Incl. coil brackets? I want to drive the quartermile on 03.08.2007. So i must be ready till then... |
|
| Author: | Garry [ Wed Jul 25, 2007 6:57 am ] |
| Post subject: | |
Rotenburg/W.? Good luck with getting anything in that quickly ... I take it most aftermarket heads will have the 99+ center bolt layout? Need to check the Patriot heads
|
|
| Author: | Jens [ Wed Jul 25, 2007 2:42 pm ] |
| Post subject: | |
so, just found one, who is willing to send me the right one. Thanks for your help |
|
| Author: | Garry [ Wed Jul 25, 2007 9:45 pm ] |
| Post subject: | |
Phew ... lucked out there ... hope you get it in time! |
|
| Author: | LS1 [ Thu Jul 26, 2007 4:55 pm ] |
| Post subject: | |
@Jens If you still need them send me a pm. I have both sides and the coil brackets as well laying around that I could borrow you for the Rothenburg event. However, shipping from Austria to you and back might be not cheap... Roozbeh |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|