F-Body Europe
http://forum.fbodyeurope.org/phpBB3/

serpentine pulley 6 rib of pref. 8 rib steeringpump /crank
http://forum.fbodyeurope.org/phpBB3/viewtopic.php?f=32&t=8342		 Page 1 of 1
Author:  jeejee [ Fri Feb 13, 2009 12:08 pm ]
Post subject:  serpentine pulley 6 rib of pref. 8 rib steeringpump /crank
looking for preferably an 8 rib serpentine pulley of aprox 6,5inch 167mm

a 6 rib pulley of simular diameter is allso better as no pulley at all :mrgreen:
no cast iron but stamped steel or aluminum, as i have to weld on it...

apparently this diameter was stock on at least bbc steeringpumps
but there are prop. plenty other applications that these were used , so please check in your garage for that old engine/ steeringpump ?

any help welcome guys !!!

thanks, Jeejee
Author:  jinstall [ Sun Mar 29, 2009 4:07 pm ]
Post subject:  Re: serpentine pulley 6 rib of pref. 8 rib steeringpump /crank
You have to start sending me these things by email so I can look here.
Author:  jeejee [ Sun Mar 29, 2009 9:42 pm ]
Post subject:  Re: serpentine pulley 6 rib of pref. 8 rib steeringpump /crank
plans chance so quickly, that i now don't need that diameter anymore, still not sure what diameter i need as i have to do some calculations for the new setup

it may be best to start with the moderate setup and attend some bitburg events before i change to the bigger blower setup + boost that might kill the engine, and then i have nothing :bash:
Author:  hotrodredneck [ Thu Apr 02, 2009 4:52 am ]
Post subject:  Re: serpentine pulley 6 rib of pref. 8 rib steeringpump /crank
I have a spare Stang power steering pump and pulley
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/