F-Body Europe

Hawk · **Posted:** Sun Jan 26, 2003 9:07 am

I am installing a roll bar, Shocks and springs thats about it.

Garry · **Posted:** Sun Jan 26, 2003 10:47 am

Hm ... don't know when we'll get to it, but got some MSD parts flying around for the '79 ...

My96z · **Posted:** Sun Jan 26, 2003 3:19 pm

I just got permission to start putting together a stroker when I get to Texas!!! WhooooHoooo!!!!

fbody97 · **Posted:** Sun Jan 26, 2003 3:46 pm

Too much to list here.

Roy · **Posted:** Sun Jan 26, 2003 3:46 pm

Suspension tweaks.

Hawk · **Posted:** Sun Jan 26, 2003 5:06 pm

I thought you were going to do more than that Roy.

Roy · **Posted:** Sun Jan 26, 2003 5:19 pm

Okay , okay man here goes
Suspension tweaks
Headers -installed
LS6 intake - installed
LS6 heads -awaiting install
subframe connectors -awaiting install
two step rev control-awaiting install
I thinK that is it.

Hawk · **Posted:** Sun Jan 26, 2003 5:32 pm

I will do the subframes. Mr beilmier will do the heads very reasonable.

FIVEOHHH · **Posted:** Sun Jan 26, 2003 6:32 pm

TRICK FLOW HEADS
TUBULAR K-MEMBER AND A-ARMS
LUNATI CAM
MANUAL RACK
1.6 SCORPION ROLLER ROCKERS.
BALLANCED AND BLUE PRINTED ROTATING FORGED ASS.
CENTER FORCE CLUTCH.
SUB CONNECTORS
STRUT TOWER BRACE.
ELEDEBROCK RPM PRFORMER INTAKE.
75 MIL MASS AIR
30LBS INJECTORS
COIL OVER WITH 90/10 STRUTS
ANDERSON POWER PIPE
MSDBTM 6
BBK ADJUSTABLE FUEL PRESSURE REGULATOR
HURST SHORT THROW
3.55 GEARS
COWL HOOD
AND TO TOP IT OFF WITH 8LBS OF BOOST FROM MY FRIEND VORTECH
ALL I AM WAITING ON IS ROCKERS , PUSH RODS AND CLUTCH

FIVEOHHH · **Posted:** Sun Jan 26, 2003 6:39 pm

[size

=18][/size]

FIVEOHHH · **Posted:** Sun Jan 26, 2003 6:40 pm

So Jack want to race this spring? :twisted:

I dont think there is a lot of cars going to be able to touch me except Sweeny. Which I hope to see in the mid 10s. I should be tinkering with low 11s to high 10s once I learn to drive it all over again. And if Roy is going LS6 he will be moving too.

Roy · **Posted:** Sun Jan 26, 2003 7:32 pm

Yep Mine is basically setup for autox , road courses, and quiet mornings on the autobahn. I doubt if mine would get 12s in the 1/4.

JackZ28 · **Posted:** Sun Jan 26, 2003 9:10 pm

I, too, will be tweaking my suspension. I am finished with go fast goodies for a while. I am going for appearance. I will be getting a set of Fikse FM5s when I get back. 11's in the rear. Should look kickass. I can't wait. I also plan to order LS1-Edit, so I can properly tune her. She is running like crap right now. She is loud as all hell, though.

Roy · **Posted:** Sun Jan 26, 2003 9:25 pm

Jack
You gonna try a little autocross this year?

GrayTA · **Posted:** Sun Jan 26, 2003 11:06 pm

Mine is getting totally rebuilt...which includes all the stuff I list on my signature....supposed to be finished on Tuesday...just in the US.

Patrick

JackZ28 · **Posted:** Sun Jan 26, 2003 11:31 pm

I sure would like to try, Roy.

Roy · **Posted:** Sun Jan 26, 2003 11:38 pm

Cool
Val and I need some competion to keep us on the edge.

JackZ28 · **Posted:** Mon Jan 27, 2003 12:47 am

Cool! After a few laps, to familiarize myself with the track, I could easily be that competition!

LuS1fer · **Posted:** Mon Jan 27, 2003 8:45 am

Just gotta finish my suspension by fitting the LCA's and APHB and fit the anniversary stripes which should put me in the 12's.....shouldn't they? LOL.

Hawk · **Posted:** Thu Jan 30, 2003 8:35 am

FIVEOHHH wrote:

So Jack want to race this spring? :twisted:

I dont think there is a lot of cars going to be able to touch me except Sweeny. Which I hope to see in the mid 10s. I should be tinkering with low 11s to high 10s once I learn to drive it all over again. And if Roy is going LS6 he will be moving too.

So how it coming wish ya luck been never seen a ford run 11's over here what are you gonna use for tires.

F-Body Europe

So who is modding this winter

Who is online