 |
View unanswered posts | View active topics
| Author |
Message |
|
Roy
|
Post subject:  Posted: Sat Oct 27, 2007 6:17 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Sat Oct 27, 2007 5:28 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
Thanks a bunch for all the help Roy. I have found what I am looking for, just need to get it ordered. Thank god it wasn't too serious. I think I will baby this car until I get a new rear end put on it. Sucks not being able to drive it! I think i might step up to 4.10 gears while this thing is torn apart, but I'm not sure how wise that is on the stock rear.
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Mon Oct 29, 2007 12:04 pm |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
|
If you want I've got some 3.23's w/ the pinion, shims etc. You'll just need a new crush sleeve. Only have 50K on the gears. Just something to consider if you are pressed.
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Mon Oct 29, 2007 7:13 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
Thanks for the offer. I got a pinion installation kit on the way already from Summit. What is the stock gear ratio on the WS6?
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Tue Oct 30, 2007 9:19 am |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
|
3.42
_________________
The "SRZ"
750rwhp, limited to 55mph flyby's in the US.
02' MY Z06, Cam, LT headers, X-pipe, Breathless CAI, Borla Stinger exh, RSD short shifter, Elite catch can, C6Z susp, CCW classic's 18x10 & 18x12...your normal everyday Z06.
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Sat Nov 03, 2007 5:50 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
Update: Got the parts today! I will definately be using Summit again for parts. The price was right and they got them here in less than a week. The guy will install everything on Tuesday, so I'm keeping my fingers crossed!
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Sat Nov 03, 2007 6:32 pm |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Sun Nov 04, 2007 12:59 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
He said he's done a few GM diffs before, so I am sure all will be fine.
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Tue Nov 06, 2007 8:44 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
The car is fixed, I pick it up and pay for it tomorrow. (400 euros-ish). Hopefully it's back together and in good order. Hopefully an update tomorrow!
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Wed Nov 07, 2007 8:26 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Wed Nov 07, 2007 9:42 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
Wish I could tell you, as I still don't have it back yet. I had to beg and plead with Pass and ID to bend the rules a bit and give me temp plates again even though I am only a month into my 3-month non-op. They were pretty cool about it, so i have another 30 days to try to register this beast. I still may have to get tires for it, so if anyone here has any that are good enough to pass inspection for sale, let me know. Anyway, got the temp plates dropped off to the mechanic, he said he wanted to test drive it and check the axles and stuff again, which is good. I am just looking forward to driving it again!! Hopefully he gives me good news tomorrow. Another update will follow!
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Thu Nov 08, 2007 8:27 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
Update: got the car back, FINALLY! It runs like a champ. I am noticing a slight whine, barely audible from the rear end, but I think that's just from paying closer attention now. Otherwise, it's good to go. Now just got to get it registered. It's nice to have it back though. Thanks again Roy for the help, it's definately appreciated.
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Thu Nov 08, 2007 8:27 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
|
Glad to hear!
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
USAF LS1
|
Post subject: Posted: Wed Dec 05, 2007 6:03 pm |
|
Joined: Wed Aug 29, 2007 5:37 am
Posts: 127
Location: Spangdahlem AB, Germany
|
|
UPDATE: FINALLY GOT IT TO PASS INSPECTION!!! Got new tires for the rear, put the old rear tires on the front. Those jackasses at the Spang inspection place still almost failed me, this time for the front tires being worn. They were looking at the outside edges, but I told them the actual tread was good and they said ok. So, 4 months and 100's of Euros later, this thing is finally passed. Went to get it registered, and the damn pass and id place was closed for commander's call. Oh well, at least it's passed. Thanks again Roy for the help. Now I can start modding it!
_________________
Jeremy
Bitburg, Germany
2002 WS6, SLP lid
"Trans Ams are like beligerent, unrefined Corvettes."
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Wed Dec 05, 2007 6:21 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
|
Congrats!
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Wed Dec 05, 2007 7:31 pm |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
