|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 13 posts ] |
|
Author |
Message |
joesal68
|
Post subject: LS6 Intake Posted: Sat Feb 16, 2013 5:23 am |
|
Joined: Mon May 23, 2011 2:33 am Posts: 41 Location: illisheim
|
I have been looking on EBAY for an LS6 intake or a similar intake. I saw this intake "97-02 LS1 LS6 Camaro Firebird 96mm Satin Qualifier Intake & Hardware" would this mount on my 98 LS1 engine without changing anything? Thanks in Advance
|
|
Top |
|
NXZ28
|
Post subject: Re: LS6 Intake Posted: Sun Feb 17, 2013 1:26 pm |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
I wouldn't get it. Your stock fuel rails won't fit and the quality of the intake looks terrible. I would hold out until I found a used LS6 intake. Make sure you run the numbers off the used LS6 intakes before purchase. The early corvette LS1 intakes looks exactly like an LS6 intake because the EGR port is solid. Have you looked on LS1tech.com under the "Sales" section?
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
joesal68
|
Post subject: Re: LS6 Intake Posted: Mon Feb 18, 2013 6:19 am |
|
Joined: Mon May 23, 2011 2:33 am Posts: 41 Location: illisheim
|
|
Top |
|
NXZ28
|
Post subject: Re: LS6 Intake Posted: Mon Feb 18, 2013 10:16 am |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
LS6 Intake for sale on ebay. Comes complete with intake, injectors, and fuel rail. http://www.ebay.com/itm/Ls6-Intake-Mani ... es&vxp=mtr
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
joesal68
|
Post subject: Re: LS6 Intake Posted: Mon Feb 18, 2013 10:22 am |
|
Joined: Mon May 23, 2011 2:33 am Posts: 41 Location: illisheim
|
Would that mount up with any issues?
|
|
Top |
|
NXZ28
|
Post subject: Re: LS6 Intake Posted: Mon Feb 18, 2013 10:46 am |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
It would be a direct bolt on. Also, did you order your headers for the 98-99 model, 01-02 model, or just the race version? The reason I am asking is because The EGR pipe for your model has a tube that runs from the passenger side exhaust to the center/front of the intake. The LS6 intake does not have this port and you would need to block off the tube mount on the header. If you ordered the race version, then no need to block off because the mount is not there to begin with.
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
joesal68
|
Post subject: Re: LS6 Intake Posted: Mon Feb 18, 2013 12:01 pm |
|
Joined: Mon May 23, 2011 2:33 am Posts: 41 Location: illisheim
|
i ordered the 1 3/4 long tube TSP Headers for 98-02 camaro/firebird. i believe i would need to block it off
|
|
Top |
|
NXZ28
|
Post subject: Re: LS6 Intake Posted: Mon Feb 18, 2013 12:20 pm |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
I just looked at the TSP headers an they do not have the EGR ports. That is good news. Bad news is that it will throw an EGR code in the ECM. We will have to disable the MIL code light for the EGR. Too easy, I did the same to my friends 99 Camaro when he installed MAC headers.
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
joesal68
|
Post subject: Re: LS6 Intake Posted: Mon Feb 18, 2013 3:06 pm |
|
Joined: Mon May 23, 2011 2:33 am Posts: 41 Location: illisheim
|
Thanks for the info, my name is Joe btw......What do you do in the Army?
|
|
Top |
|
NXZ28
|
Post subject: Re: LS6 Intake Posted: Wed Feb 20, 2013 6:02 am |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
Good to exhange some tech talk with you Joe. I am a Maint Tech.
Don
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
joesal68
|
Post subject: Re: LS6 Intake Posted: Thu Feb 21, 2013 4:05 pm |
|
Joined: Mon May 23, 2011 2:33 am Posts: 41 Location: illisheim
|
I am a 91Z serving as a First Sergeant in 2-159 ARB...........Nice to meet you
|
|
Top |
|
NXZ28
|
Post subject: Re: LS6 Intake Posted: Sat Feb 23, 2013 9:35 am |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
joesal68 wrote: I am a 91Z serving as a First Sergeant in 2-159 ARB...........Nice to meet you Awesome. That was my MOS path prior to moving over to the darkside.
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
joesal68
|
Post subject: Re: LS6 Intake Posted: Sat Feb 23, 2013 3:42 pm |
|
Joined: Mon May 23, 2011 2:33 am Posts: 41 Location: illisheim
|
Our maint tech is CW2 garry Church, not sure if you know him. Ill look you up when i get back
|
|
Top |
|
|
Page 1 of 1
|
[ 13 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
| |