F-Body Europe


It is currently Wed Jun 25, 2025 1:09 pm

All times are UTC + 1 hour





Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: going on my third transmission
PostPosted: Tue Feb 19, 2002 9:10 am 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Yep that is right 3 six speed transmissions in 4 years. Now that has got to be some sort of record. Hopefully in about 4 weeks it will be up and running with a new one in it compliments of GM Europe. Oh yeah and they're fixing that pesky pinion seal leak too. We'll see how long that lasts. One last thing ,I am buying that manual transmission cooler , it seems that this dexron can't seem to take the heat of extended triple digit auto bahn speeds too well.
Later

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 10:02 am 
Offline
Member
User avatar
 Profile

Joined: Tue Aug 07, 2001 4:40 pm
Posts: 166
Location: Bamberg, Germany
How does the fluid flow through the cooler? Does it use a pump? That pinion seal won't last long at triple digit speed either.


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 12:24 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
Wow, what do you do to that thing Roy??? :O I thought I was bad.. At least you haven't wrecked yours, though!! I would have taken two fried trannies over those two wrecks anyday!! :)

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 12:24 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
I use Liqui-Moly, works pretty well, and if it's good for F1, it's good enough for my Z!! ;)

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 12:50 pm 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Quote:
How does the fluid flow through the cooler? Does it use a pump? That pinion seal won't last long at triple digit speed either.


Yep it uses an external pump and plumbs into the drain and fill plugs. Yeah I kinda figure the pinion seal will dump again.


Quote:
Wow, what do you do to that thing Roy??? :O I thought I was bad.. At least you haven't wrecked yours, though!! I would have taken two fried trannies over those two wrecks anyday!! :)


Jack you know me , I basically do hot laps,autox, and autobahn rennen. Never hardly doany of from a stop and floorit stuff.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 2:10 pm 
Offline
No Life
User avatar
 Profile

Joined: Thu Apr 11, 2002 10:10 pm
Posts: 922
We may have to find a Muncie for you, either that or something with alot of titanium in it.


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 2:13 pm 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Quote:
We may have to find a Muncie for you, either that or something with alot of titanium in it.


I was thinking of a spare duece tranny with the shifter sticking out of the top of the car.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 3:26 pm 
Offline
Senior Member
User avatar
 Profile

Joined: Fri Nov 16, 2001 2:08 pm
Posts: 279
Location: Newcastle upon Tyne, England, UK
Some of the US web sites mention wrecking transmissions.

Can you comment on how good the auto 4L60E is???


Top
 

 Post subject:
PostPosted: Tue Feb 19, 2002 10:04 pm 
Offline
No Life
User avatar
 Profile

Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
you guys all need to stop talking about transmissions. Everytime someone mentions somthing bad, my car decides to it can't be left out on the action. Roy all I can say is If I still had warranty I would milk it dry. That LS1 of yours is getting a little high on the miles isn't it time for a new one. :) got to love the warranty


Top
 

 Post subject:
PostPosted: Wed Feb 20, 2002 8:52 am 
Offline
Senior Member
User avatar
 WWW  Profile

Joined: Sun Jul 22, 2001 5:14 pm
Posts: 646
Location: Landstuhl, Germany
Well Roy it looks like you are tied with me. I have gone through 3 in 3 yrs! It really sucks to break one over here.


Top
 

 Post subject:
PostPosted: Wed Feb 20, 2002 4:09 pm 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
My96z
Thats what I hope that this manual tranny cooler will solve the overheat problem.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Wed Feb 20, 2002 4:29 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
Roy, what signs does it give you, before going out?

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Wed Feb 20, 2002 5:06 pm 
Offline
Senior Member
User avatar
 WWW  Profile

Joined: Sun Jul 22, 2001 5:14 pm
Posts: 646
Location: Landstuhl, Germany
Mine went BANG! :D


Top
 

 Post subject:
PostPosted: Wed Feb 20, 2002 6:16 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
I suppose that could be an indicator!! :O

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Wed Feb 20, 2002 9:03 pm 
Offline
No Life
User avatar
 ICQ  Profile

Joined: Mon May 28, 2001 7:29 pm
Posts: 1175
Location: fairfield, CA
So is the main problem the heat? Or do you have to build them up like the auto? Just curious if I should be worried with the added power I will have.

_________________
Dave Brooks
Image


Top
 

 Post subject:
PostPosted: Thu Feb 21, 2002 4:30 am 
Offline
No Life
User avatar
 Profile

Joined: Thu Apr 11, 2002 10:10 pm
Posts: 922
Quote:
So is the main problem the heat? Or do you have to build them up like the auto? Just curious if I should be worried with the added power I will have.


Your not gonna have enough power to hurt a healthy T56. If it will stand up to a powershifting Viper ACR, you should be okay. More of the extended abuse of racing/high speed.


Top
 

 Post subject:
PostPosted: Thu Feb 21, 2002 7:30 am 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Quote:
Can you comment on how good the auto 4L60E is???

Jagsy
The A4 is well built tranny ,but like any automatic heat is the number one killer for them. Basic rule of thumb for tranny fluid temp is 190-240 degrees F. Any lower temp and you could have T/C lockup problems. Any higher and you can get fluid viscosity breakdown and slippage.
//////////////////////////////
Quote:
Quote:
So is the main problem the heat? Or do you have to build them up like the auto? Just curious if I should be worried with the added power I will have.


Dave you should be good on the tranny ,I'd be more worried about the 10bolt rearend spitting a axle out and you get a free wheel tubbing compliments of c-clip Inc..
////////////////////////////////
Your not gonna have enough power to hurt a healthy T56. If it will stand up to a powershifting Viper ACR, you should be okay. More of the extended abuse of racing/high speed.


Rob you hit the nail right on the head, extended highspeed abuse. Whats racing ? I don't do that.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Fri Feb 22, 2002 9:40 am 
Offline
Senior Member
User avatar
 WWW  Profile

Joined: Sun Jul 22, 2001 5:14 pm
Posts: 646
Location: Landstuhl, Germany
Roy,
Who is doing your tranny? I have one here that needs to be fixed.


Top
 

 Post subject:
PostPosted: Fri Feb 22, 2002 1:42 pm 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
My96Z
I am getting replaced free of charge . but in another life I used to rebuild trasnmissions from hummers to Tanks.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Fri Feb 22, 2002 5:39 pm 
Offline
Senior Member
User avatar
 WWW  Profile

Joined: Sun Jul 22, 2001 5:14 pm
Posts: 646
Location: Landstuhl, Germany
You interested at looking at mine? I even have the GM service manual.


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits