F-Body Europe


It is currently Mon Jun 23, 2025 7:35 pm

All times are UTC + 1 hour





Post new topic Reply to topic  [ 19 posts ] 
Author Message
 Post subject: Updates on the TA
PostPosted: Mon Jun 18, 2001 1:49 pm 
Offline
No Life
User avatar
 Profile

Joined: Sat May 26, 2001 6:35 pm
Posts: 954
Well I filed the report with the SP's on Sunday. I was going to do it Saturday, but they wanted to charge me with failure to control my vehicle. So Sunday when I went in and told them of the tire in the road I swerved to avoid they did not charge me :) I went to the insurance company and filed my claim. I will have to pay $400 for my deductable, but all is covered to include the tow there. I do not have rental car on my policy, but the club pays off as Dave with the 97 TA WS6 offered to let me use his second car. Talk about friends..... After posting my saga on the internet to a few boards I am sure this is the major damage. Of course 4 tires and wheels, bent rear axle(explains the shifted look at top of tire. Possibly a slight bend in the rear of the passenger side of the Subframe. I think the SFC saved the frame. The front I am probably out a set of A-arms upper and lower on the left and the steering assembly. A new paint job for atleast the front and passenger side, if not the whole car since it is hard to match metallic paint. So I will find out more probably Thursday and my car should be back in town next week. The insurance company said they can recommend places to take it, but it is my decision on where I actually go. Any suggestions from the local guys? All I want is possibly to get some different rims(Y2K Vette) and any of my suspension components that are bad replaced with aftermarket. They can keep the extra money....... Sorry so long, but I need to vent occasionally. I think we should start an F-body Europe bad car luck club.. We should already have a good strong membership......


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 1:53 pm 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
Quote:
We should already have a good strong membership......

Yup, two people from Saturday alone is a good (bad?) start ... do I count with the &§$§$&§ battery? :) Nah ...
So how come you're in for a paint job? Thought you said it hadn't done anything to the body ... !?

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 2:28 pm 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
P.S. - can anybody post some pics? Teach people to stay off the white line ...

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 2:34 pm 
Offline
No Life
User avatar
 Profile

Joined: Sat May 26, 2001 6:35 pm
Posts: 954
Rock chips from the time I have owned the car. I blamed it on the accident.


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 3:13 pm 
Offline
Member
User avatar
 Profile

Joined: Sun May 27, 2001 11:40 am
Posts: 114
Location: Kaiserslautern, Germany
I have several pics, Ill post 'em soon...

Since we're venting... I'm supposed to ship my car on Thursday. The registrarion expires while its en route to Dallas, so I went to get it inspected. While the German inspector looks at the car I make small talk and say Im shipping it soon and just need a renewal. I mentioned this before... he then finds an exhast leak (fixed), a very, very small drum brake leak (wiped off) and a bent tie rod end. VERY slight bend, its not unsafe and can still be adjusted. Theres no way he will look the other way on the tie rod, even when I showed them a reciept of the new one I ordered (whole front end poly rebuild). Well, the tie rods didnt come in time, and even though you "deregister" your car when its shipped, it cannot be expired when you pick it up... I have tripple checked this policy and have been looking for a loophole, and an SP at registration found one. I have to register non-op, turn in the plates, turn it in for shipment, and when it gets to Dallas, I have to get temp. plates and drive to Little Rock. All of this because one @ssh*le decided he didnt want to pass me!!! I would have slipped him $50 to turn his head the other way and save me hours of aggrivation!

_________________
91 black Z28
ON ITS WAY TO USA!!
SLP cam, adj fuel press, custom Fastchip, B&M shift kit, ram air, K&N, Flowmaster
Image


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 5:30 pm 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
Quote:
Rock chips from [..] the accident.

Hey, you should leave unnecessary words out ... ;) see what I mean? :)

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 5:34 pm 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
Quote:
All of this because one @ssh*le decided he didnt want to pass me!!! I would have slipped him $50 to turn his head the other way and save me hours of aggrivation!

Know what you mean - german TÜV (and Dekra and one other place) wouldn't pass mine because they said the back tires were too far out from under the rear wheel case - we're talking a quarter inch or so! Because of security reasons ... come on, if I'm gonna hit somebody with them couple of millimeters, guess what hits him first - a big, hard mirror ... stickin' out _way_ further ... and not in the legs, but somewhere between hips and chest ...
Also, I see riced-out Audis, VWs, Opels all the time with wheel hanging out easily twice as far ... or more ...
Oh well - wheel change once every two years ain't that bad ... even though I could probably get a couple bucks for the stock chrome wheels ... this way, I just stack em in the basement ...

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 5:54 pm 
Offline
No Life
User avatar
 ICQ  Profile

Joined: Mon May 28, 2001 7:29 pm
Posts: 1175
Location: fairfield, CA
It's all good. After seeing that crap unfold it's the least I could do. Once its done, it'll be brand new. Dave

_________________
Dave Brooks
Image


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 6:24 pm 
Offline
No Life
User avatar
 Profile

Joined: Sat May 26, 2001 6:35 pm
Posts: 954
Quote:
It's all good. After seeing that crap unfold it's the least I could do. Once its done, it'll be brand new. Dave


I think you misunderstood what I meant. Dave Vautier with the Black Trans Am WS6 is lending me his second car to use while mine is down. I do however thank you for the ride from the prison(ADAC) to the show. Oh and for the killing of the rice bass that was playing there at the show. :)


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 9:14 pm 
Offline
No Life
User avatar
 ICQ  Profile

Joined: Mon May 28, 2001 7:29 pm
Posts: 1175
Location: fairfield, CA
my bad. i like to help wherever posible.

_________________
Dave Brooks
Image


Top
 

 Post subject:
PostPosted: Mon Jun 18, 2001 10:56 pm 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
Hey George, you've seen mine get done twice, and both times were nothing short of professional, so I'd recommend you have them do it!! BTW, good to hear that you have some news!!

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject: Sorry about the car
PostPosted: Tue Jun 19, 2001 1:31 am 
Offline
No Life
User avatar
 Profile

Joined: Thu Apr 11, 2002 10:10 pm
Posts: 922
I really hope it turns out to be as painless as possible.

If you are going to have to replace the front a arms, LG makes a adjustable one (probably lighter too).

I sure hope the unibody didnt get tweaked, but if it did, how would they fix it when you have subframes already installed?

If the insurance pays for the vette rims from a german dealer, they will probably want as much $$$ as a set of Fikse!!!

Sorry again
Rob


Top
 

 Post subject:
PostPosted: Tue Jun 19, 2001 6:16 am 
Offline
No Life
User avatar
 Profile

Joined: Sat May 26, 2001 6:35 pm
Posts: 954
Well I am working with a guy that I know who owns a shop here. He said that we can order whatever I want and all I have to do is pay the difference. That is cool since it is probably cheaper for the parts I can find than stock. If the unibody is tweaked a grinder will take off the SFC and then they can be re used.


Top
 

 Post subject:
PostPosted: Tue Jun 19, 2001 9:22 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
Get the LG arms. I'll be putting set on this winter. Hope everything works out for you. Oh can I be the President of the Fbody down & out club too? eh eh...........

_________________
The "SRZ"
750rwhp, limited to 55mph flyby's in the US.

02' MY Z06, Cam, LT headers, X-pipe, Breathless CAI, Borla Stinger exh, RSD short shifter, Elite catch can, C6Z susp, CCW classic's 18x10 & 18x12...your normal everyday Z06.


Top
 

 Post subject: George
PostPosted: Tue Jun 19, 2001 5:13 pm 
Offline
No Life
User avatar
 Profile

Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
Hey man I feel your pain I was there with my car. Someone ripped off the front end I don't think I ever drank as much as I did that night. And John if your the pres I want to apply for vice pres or at least secratary. And if I make vice pres I would like to host a party at my house. The party will be called get the green z up the hill and in the garage. Who's in


Top
 

 Post subject: Parts are all in minus rims...
PostPosted: Thu Aug 02, 2001 10:32 pm 
Offline
No Life
User avatar
 Profile

Joined: Sat May 26, 2001 6:35 pm
Posts: 954
Well after battling the cargo center at Frankfurt I now have all of my parts.. I am so happy.. I will drop them off at the shop tomorrow.. I never thought it would get here. Now as long as the axle is not bent I will be up next Friday...:):):):):):):):):):)


Top
 

 Post subject:
PostPosted: Fri Aug 03, 2001 12:02 pm 
Offline
No Life
User avatar
 ICQ  Profile

Joined: Mon May 28, 2001 7:29 pm
Posts: 1175
Location: fairfield, CA
Outstanding!! So if you get the beast running, you coming up to the Bitburg races on the 12th?

_________________
Dave Brooks
Image


Top
 

 Post subject:
PostPosted: Fri Aug 03, 2001 1:42 pm 
Offline
Poster in Chief
User avatar
 WWW  ICQ  Profile

Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
Quote:
Now as long as the axle is not bent I will be up next Friday...

Great news! Hope the very best for your car ...

_________________
Garry Glendown * '99 Firehawk Convertible

"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."


Top
 

 Post subject: Latest News....
PostPosted: Sat Aug 04, 2001 9:38 pm 
Offline
No Life
User avatar
 Profile

Joined: Sat May 26, 2001 6:35 pm
Posts: 954
I was told Friday that it will be ready for pickup on Thursday the 9th.. I hope all is well with it...


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits