|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 13 posts ] |
|
Author |
Message |
Newbiewar
|
Post subject: Where to get suspension work done? Posted: Sun Dec 13, 2009 10:57 am |
|
|
Cool Newbie |
|
Joined: Sun Dec 13, 2009 10:47 am Posts: 33
|
Well I was thinking to put some Eibash Springs and Bilstien shocks on my z28, but I dont know who in Germany is any good with them. I live in the Kaiserslautern area.
_________________ White 95 Z (Left rear corner smashed) Working on building her from the ground up... end less pit of money
|
|
Top |
|
Garry
|
Post subject: Re: Where to get suspension work done? Posted: Sun Dec 13, 2009 12:20 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
I guess you could check with Dany's place ... shouldn't take long to put the stuff in ...
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
Chevroletfreak
|
Post subject: Re: Where to get suspension work done? Posted: Sun Dec 13, 2009 1:46 pm |
|
|
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
I can do it if you are registered on base.
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
Newbiewar
|
Post subject: Re: Where to get suspension work done? Posted: Wed Jan 27, 2010 7:13 pm |
|
|
Cool Newbie |
|
Joined: Sun Dec 13, 2009 10:47 am Posts: 33
|
Chevroletfreak wrote: I can do it if you are registered on base. by registered on base, you mean what...? got some strano springs coming with bilstein shocks
_________________ White 95 Z (Left rear corner smashed) Working on building her from the ground up... end less pit of money
|
|
Top |
|
Chevroletfreak
|
Post subject: Re: Where to get suspension work done? Posted: Wed Jan 27, 2010 8:14 pm |
|
|
No Life |
|
Joined: Sat Mar 04, 2006 7:03 pm Posts: 1007 Location: Oklahoma, USA
|
Newbiewar wrote: by registered on base, you mean what...?
got some strano springs coming with bilstein shocks I mean that you have a USAEUR tagged vehicle and have access to Ramstein. However, I am very deep into my own projects now and will probably be too busy. We can try to work something out though.
_________________ My name is Brian and I have a SSickneSS
Black 01 6spd SS # 5971 - AFR, FAST, Nick Williams, SLP, Kooks, Borla, Kirban, Spec, Moser, BMR, Spohn
|
|
Top |
|
Newbiewar
|
Post subject: Re: Where to get suspension work done? Posted: Wed Jan 27, 2010 10:00 pm |
|
|
Cool Newbie |
|
Joined: Sun Dec 13, 2009 10:47 am Posts: 33
|
Chevroletfreak wrote: Newbiewar wrote: by registered on base, you mean what...?
got some strano springs coming with bilstein shocks I mean that you have a USAEUR tagged vehicle and have access to Ramstein. However, I am very deep into my own projects now and will probably be too busy. We can try to work something out though. yea, not a problem... springs probably wont be in for a few weeks, and who knows what my unit is doing then... Got to put it in the body shop soon too ... among other things
_________________ White 95 Z (Left rear corner smashed) Working on building her from the ground up... end less pit of money
|
|
Top |
|
theshadowed1
|
Post subject: Re: Where to get suspension work done? Posted: Mon Feb 01, 2010 2:16 pm |
|
Joined: Sun May 19, 2002 6:49 pm Posts: 118 Location: Minot North Dakota...Again!
|
the hardest part is those front struts... The Strano/bilstein shocks are shorter than factory so make sure you have something to support the rear axle(or use the hub). The front isnt too bad and you can do it yourself with a tranny jack to support the A arms.
_________________ See it, Hear it, Feel it!!
|
|
Top |
|
Newbiewar
|
Post subject: Re: Where to get suspension work done? Posted: Mon Feb 01, 2010 3:41 pm |
|
|
Cool Newbie |
|
Joined: Sun Dec 13, 2009 10:47 am Posts: 33
|
theshadowed1 wrote: the hardest part is those front struts... The Strano/bilstein shocks are shorter than factory so make sure you have something to support the rear axle(or use the hub). The front isnt too bad and you can do it yourself with a tranny jack to support the A arms. Thanks, I hope I like them, I went with Eibash(pro street)/bilstein on my formula, and I loved the way it rode, I started listening to sam strano, and i figured I'd give his product a try, seems very educated, and not afraid to clarify misnomers... I had my Eibash put in at a exhaust shop in Cali, but I'm not familiar with the shops around Kaiserslautern.
_________________ White 95 Z (Left rear corner smashed) Working on building her from the ground up... end less pit of money
|
|
Top |
|
BenZ28
|
Post subject: Re: Where to get suspension work done? Posted: Tue Feb 02, 2010 9:31 am |
|
Joined: Mon Sep 10, 2001 3:53 pm Posts: 2485 Location: Mainz, Germany
|
I'm sure you'll like them. I've got the Strano springs with Konis.
_________________ 1999 Camaro Z28, black, T-Tops, M6
|
|
Top |
|
Newbiewar
|
Post subject: Re: Where to get suspension work done? Posted: Tue Feb 02, 2010 11:34 am |
|
|
Cool Newbie |
|
Joined: Sun Dec 13, 2009 10:47 am Posts: 33
|
BenZ28 wrote: I'm sure you'll like them. I've got the Strano springs with Konis. Konis, very expensive... otherwise I would have...
_________________ White 95 Z (Left rear corner smashed) Working on building her from the ground up... end less pit of money
|
|
Top |
|
BenZ28
|
Post subject: Re: Where to get suspension work done? Posted: Wed Feb 03, 2010 9:58 am |
|
Joined: Mon Sep 10, 2001 3:53 pm Posts: 2485 Location: Mainz, Germany
|
Yes, I know... I started with Koni/Bilstein combo with stock springs and switched to Koni/Koni with Strano springs last year.
_________________ 1999 Camaro Z28, black, T-Tops, M6
|
|
Top |
|
Newbiewar
|
Post subject: Re: Where to get suspension work done? Posted: Mon Feb 08, 2010 8:09 pm |
|
|
Cool Newbie |
|
Joined: Sun Dec 13, 2009 10:47 am Posts: 33
|
Actually make that UMI K-Member & CM Adjustable A-Arms... Should be a good ride afterwards...
probably have a shop do that, because it will need to be aligned anyway...
_________________ White 95 Z (Left rear corner smashed) Working on building her from the ground up... end less pit of money
|
|
Top |
|
TopleSS
|
Post subject: Re: Where to get suspension work done? Posted: Mon Feb 15, 2010 7:51 am |
|
Joined: Wed Apr 23, 2008 11:03 am Posts: 75
|
I recommend Phil's Garage over in Einseidlerhof. He knows what he's doing, does great work and speaks perfect english.
_________________ 2008 Corvette Z51 M6 Black
2000 Camaro SS Conv. M6 *Sold*
|
|
Top |
|
|
Page 1 of 1
|
[ 13 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
| |