F-Body Europe

hi guys

as you can prob tell getting a little fed up of my ta at the mo

got her about 5 mouths ago knowing she needed work and was going to be a summer project. main problems bad wiring and the floor is gone.

any how been working on her all the wiring is done now.

last week did a trans fluid/filter change.
flushed the rad out
took of the pulley for the supercharger as it was buckled sorted it and put back together

and now she just wont start

has spark, fuel and air but will not catch

she tyring but just not good enough

please any ideas guys would be great

o and she a 3rd gen 5.7 tpi

tps, iac, bad computer, ignition module went out, dist. is 180 out.. could be many things. what wiring issues?

the wires was just a mess from who ever did the blower just been sorting them out

I would check the mechanicals first. then check the electronics.

had another go today still the same

she works at lasted bloody thing

ended out to be wet plugs whipped out 5 that i could get to and they were covered in fuel dried them of put them back in and of she went

thanks for your help guys


[youtube]<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/oZ4sro3kUNo?fs=1&amp;hl=en_GB"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/oZ4sro3kUNo?fs=1&amp;hl=en_GB" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>[/youtube]

Glad you figured it out . Sometimes the most simple stuff just gets in thee way. Fixed your link

thanks dude

you tube has been very funny at the mo