F-Body Europe


It is currently Tue Jun 04, 2024 6:35 pm

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Lost my Torque Converter and a Race at the same time
PostPosted: Fri Apr 21, 2006 8:06 am 
Offline
Senior Member
User avatar
 Profile

Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
I drove my car on Wednesday from Bamberg to Hanau and back again. Halfway to Hanau I noticed the tranny temp was at 180* and rising. The tranny has never gotten that hot before even in the summer. By the time I reached Hanau the temp was at 200*. Now my car is an automatic so I do not run the high mph like the 6-speed cars. I drove it back at around 10pm. The weather was alot cooler. I could only run 65-70mph to keep the tranny temp below 190*. I thought maybe a cooler line was pinched. I checked it out yesterday at lunch and the lines were fine. I checked the tranny fluid and it was fine. Thank God it was not burned. Then I had to drive to Wuerzburg yesterday. Same thing again. Tranny temp reach 210* by the time I was on post. Then once I left post I met up with a White Z06. We did two races from a roll. I dropped the car into second, we went, and he pulled about 2 car on me. I noticed that my revs were going up fast but the car was not pulling. Tranny temp went from 185* to 210* in about 10 seconds. I limped it back to Bamberg and scanned the computer at the craft shop. Sure enough, Code P1870 (Transmission Slippage) was thrown. I think the TCI SSF 3500 converter is toast. It is not locking up at all. This pisses me off because it only has 10K miles on it. I guess it is not a good converter for the autobahn. Now I am not going to make the first two races of the year. I have had some bad luck this year. It extends from bad parts or people owing me money. My project has been set back month after month. I am just venting a little here. But I will say that the Z06 sounded good because I was behind him. :x

_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors


Top
 

 Post subject:
PostPosted: Fri Apr 21, 2006 9:58 am 
Offline
No Life
User avatar
 WWW  YIM  Profile

Joined: Sat Nov 23, 2002 11:45 pm
Posts: 829
Location: Stuttgart, Germany
Sorry to hear about the bad luck! Hope all is well soon!!!


Top
 

 Post subject:
PostPosted: Fri Apr 21, 2006 10:52 am 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Don
Sorry to hear about the bad luck also.

Sounds like you ran into Great white. His white vette has a LGM 402. It muscled out I believe 490RWHP.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Fri Apr 21, 2006 10:54 am 
Offline
No Life
User avatar
 WWW  ICQ  Profile

Joined: Sat Oct 13, 2001 4:53 pm
Posts: 1041
Location: Erlangen <=> Coburg
$hit... hope you get it fixed till Luckau!!


Top
 

 Post subject:
PostPosted: Fri Apr 21, 2006 11:47 am 
Offline
Senior Member
User avatar
 Profile

Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
Roy wrote:
Don
Sorry to hear about the bad luck also.

Sounds like you ran into Great white. His white vette has a LGM 402. It muscled out I believe 490RWHP.


It does fly. Even with a new converter I doubt I can hang with that. Well, unless I spray.

_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors


Top
 

 Post subject:
PostPosted: Fri Apr 21, 2006 3:14 pm 
Offline
Cool Newbie
 Profile

Joined: Fri Jan 20, 2006 7:53 am
Posts: 10
Location: katterbach
Do you need a TC? Im in the process of puting in my fuddle and i got a stocker if ya like.

_________________
black 02 z28
lid,LM,stall.kook's,555r's


Top
 

 Post subject:
PostPosted: Fri Apr 21, 2006 6:06 pm 
Offline
Senior Member
User avatar
 Profile

Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
I appreciate the offer but my car would eat a stocker in a few days. I am going to order a Fuddle 3600 built to handle the spray. How long did it take you to get yours?

_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors


Top
 

 Post subject:
PostPosted: Sat Apr 22, 2006 9:44 am 
Offline
Cool Newbie
 Profile

Joined: Fri Jan 20, 2006 7:53 am
Posts: 10
Location: katterbach
10 days after they siad they said it was in the mail. took longer to square away the shipping (overseas apo :cry: ), I paid $90 for the express mail. The trouble is getting them on the phone as john is the only one who answers it.

_________________
black 02 z28
lid,LM,stall.kook's,555r's


Top
 

 Post subject:
PostPosted: Sun Apr 23, 2006 8:34 am 
Offline
Needs a Job
User avatar
 Profile

Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
Damn sorry to hear about the TC. It's always something. 10K on the last TC you can't send that back to be looked at? That should've lasted a lot longer I would think.


Top
 

 Post subject:
PostPosted: Mon Jun 12, 2006 9:50 am 
Offline
Senior Member
User avatar
 Profile

Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
I know how you feel I have lost my tranny 3 times last time was smoking an 03 cobra.

_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)

2000 WS6 RIP


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits