|
View unanswered posts | View active topics
Author |
Message |
Fast GTO
|
Post subject: Cam has arrived - install thread Posted: Thu Dec 29, 2005 1:31 pm |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
Well, I finally got the cam in my hands along with a cam install kit that includes gaskets and a new crank bolt.
All I need now is the tools, oil, and anti-freeze.
So this is my official thread asking who is willing and able to help me out on this.
Install is likely to be in Bamberg at NXZ28 bay over a weekend.
What weekend works for everyone? I am shooting for MLK Friday and Saturday if necessary, but I know people have plans.
Attachments: |
camkit.jpg [ 76.2 KiB | Viewed 7660 times ]
|
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
Roy
|
Post subject: Posted: Thu Dec 29, 2005 2:47 pm |
|
Joined: Sun May 27, 2001 2:52 pm Posts: 5556 Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
Top |
|
Daddy
|
Post subject: Posted: Thu Dec 29, 2005 2:50 pm |
|
Joined: Mon Aug 25, 2003 5:59 pm Posts: 2334 Location: Little Rock Arkansas
|
Roy wrote: Just a little too far too drive.
What kind of friend are you Roy?
How's that car running? And where did that video go?
_________________ I wake up in the morning and piss excellence!
|
|
Top |
|
Lancer033
|
Post subject: Posted: Thu Dec 29, 2005 7:08 pm |
|
Joined: Mon Aug 09, 2004 6:27 pm Posts: 846 Location: Hampton, VA
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Thu Dec 29, 2005 9:01 pm |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
Where is Hawk when you need him?
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
slickmetal.com
|
Post subject: Posted: Thu Dec 29, 2005 10:48 pm |
|
Joined: Tue Jun 08, 2004 10:31 am Posts: 490 Location: D-M AFB, AZ formally Bitburg 2002-2006
|
i though NXZ28 was going to help me
_________________ 2011 Chevy Camaro SS/RS Sold my Bird to ChrisV6! 1998 Skyline GTS - SOLD! 1986 Buick Grand National -SOLD!
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Fri Dec 30, 2005 12:13 am |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
slickmetal.com wrote: i though NXZ28 was going to help me
There is plenty of him to go around.
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
slickmetal.com
|
Post subject: Posted: Fri Dec 30, 2005 10:58 am |
|
Joined: Tue Jun 08, 2004 10:31 am Posts: 490 Location: D-M AFB, AZ formally Bitburg 2002-2006
|
yeah i have tried to get ahold of him via PM here and at mighty, to no avail.
_________________ 2011 Chevy Camaro SS/RS Sold my Bird to ChrisV6! 1998 Skyline GTS - SOLD! 1986 Buick Grand National -SOLD!
|
|
Top |
|
NXZ28
|
Post subject: Posted: Sat Dec 31, 2005 12:25 pm |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
I have been back and forth between Bamberg and Hanau over the holidays. I have very limited internet access until this Tuesday or Wednesday. I haven't forgotten about you all.
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Tue Jan 03, 2006 8:06 pm |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
No one else interested in helping out?
NXZ28, do you have the necessary tools? i.e pulley remover and spring compressor?
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Tue Jan 03, 2006 8:40 pm |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
Gentlemen, me and Don need a balancer pulley remover, we have the spring compressor just not the pulley remover.
Don, this is what the guys at ls1gto.com are saying we need for tools:
Needed:
- Set of metric sockets, deep and normal (8/10/12/15 may be needed)
- Set of metric wrenches (8/10/12/15 may be needed)
- 1/2" drive 24mm socket
- Spark plug socket 5/8" deep socket
- Various socket 3/8â€
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
spade
|
Post subject: Posted: Thu Jan 05, 2006 1:10 pm |
|
Joined: Sun Dec 22, 2002 10:44 pm Posts: 152 Location: Belgium
|
I am on the prowl for a pulley puller as well. Once I find once I will let you know were to get it unless someone has one on hand to loan out?
|
|
Top |
|
ChrisV6
|
Post subject: Posted: Thu Jan 05, 2006 2:47 pm |
|
Joined: Sat Oct 13, 2001 4:53 pm Posts: 1041 Location: Erlangen <=> Coburg
|
Well, i built one out of a dismantled 3-arm-puller...
let´s say: It works. Somehow.
(great *cough* german engineering *cough*)
_________________
2001 Pontiac Firebird Convertible 3.8l V6 - daily cruiser
1994 Pontiac Firebird 3.4l V6 - new engine one the way
1990 Chevy Beretta GTZ, back on the road in the year 2057
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Thu Jan 05, 2006 5:11 pm |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
Supposedly autocraft shops have them.
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
spade
|
Post subject: Posted: Fri Jan 06, 2006 8:52 am |
|
Joined: Sun Dec 22, 2002 10:44 pm Posts: 152 Location: Belgium
|
|
Top |
|
Daddy
|
Post subject: Posted: Fri Jan 06, 2006 11:48 am |
|
Joined: Mon Aug 25, 2003 5:59 pm Posts: 2334 Location: Little Rock Arkansas
|
ChrisV6 wrote: Well, i built one out of a dismantled 3-arm-puller... let´s say: It works. Somehow. (great *cough* german engineering *cough*)
Now how long did that car just sit?
_________________ I wake up in the morning and piss excellence!
|
|
Top |
|
ChrisV6
|
Post subject: Posted: Fri Jan 06, 2006 4:38 pm |
|
Joined: Sat Oct 13, 2001 4:53 pm Posts: 1041 Location: Erlangen <=> Coburg
|
-offtopic-
Daddy wrote: Now how long did that car just sit?
Hmmm...about 2.5 years? But that engine is trashed anyhow.
-offtopic-
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Sun Jan 08, 2006 3:19 pm |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
Install is going to be delayed by 2 weeks. I am getting some head!
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Fri Jan 20, 2006 5:48 am |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
I now have a spring compressor and balancer remover, just waiting on the Heads.
If someone needs to use these let me know.
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
Fast GTO
|
Post subject: Posted: Fri Feb 17, 2006 8:05 pm |
|
Joined: Sun Sep 26, 2004 4:12 pm Posts: 404 Location: Schweinfurt Germany
|
My heads have arrived and I have the tools I need. I will be back from CMTC on the 15th of MAR. Who is willing to help me get this thing installed.
_________________ 2003 Cobra Current Modifications: 2.2L KB (Race 20psi = 632rwhp / 592rwtq; Street 18psi = 626rwhp / 564rwtq) Full Bassani Exhaust AEM Meth Injection
|
|
Top |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
| |