 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 7 posts ] |
|
| Author |
Message |
|
AutobahnZ06GT
|
Post subject: GM HOTCAM DYNO RESULTS  Posted: Mon Jun 28, 2004 3:23 pm |
|
Joined: Fri Apr 04, 2003 6:59 pm
Posts: 118
Location: Heidelberg
|
|
Anyone do a dyno with the GM Hotcam, I just did an install on my 01 Z06, sounds nasty. Does anyone have any 1/4 mile times with this cam and or road racing experience?
Thanks,
Nick
_________________
04 LS6 block, random tech high flow cats, Vararam air intake, LAPD carbon fiber power duct, C6 Z06 shifter, RD motorsports crossbar & 5 Point Harness, GM T1 sway bars, 04 Sachs shocks, Movit brakes, carbon fiber high rise hood, magnason blower
|
|
| Top |
|
|
SRZ
|
Post subject: Posted: Tue Jun 29, 2004 4:41 am |
|
Joined: Sun May 27, 2001 3:42 pm
Posts: 3430
Location: FL
|
|
Can't say that we do. But just w/ the heads and cam you are close to 410-420 at the wheel. 01's were 380 stk right?
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Tue Jun 29, 2004 4:45 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
Hey Nick , Sorry no dyno times yet , But I doo have extensive RR experience with . The cam has a operating range to 55ooo rpms , but still pulls hard to my redline of 6200 . The midrange is fat on it also. Are you still going stroker?
_________________
Roy
My vids on Youtube
My vids on Streetfire
|
|
| Top |
|
|
AutobahnZ06GT
|
Post subject: Posted: Tue Jun 29, 2004 5:14 am |
|
Joined: Fri Apr 04, 2003 6:59 pm
Posts: 118
Location: Heidelberg
|
Roy,
Glad to hear from you bro...are you back? If you are, welcome back. Looking at the specs of the hotcam, the power band and torque curve is better than the 01 LS6 Cam. I am going to switzerland on 7 July to get a dyno tune with LS1 edit, a tuner their is doing it for me, along with a chasis dyno.
We are doing the Vette / Viper shootout 10 July at Hockenheim. The swiss vette club: http://www.scci.ch is hosting it, I am awaiting my rear and tranny coolers and new radiator with engine oil cooler. Did not get the stroker kit yet, lack of funds, expect to in the next few months though. How about you, did you get all of your goodies on? I am on leave from 1-12 July to get ready for the race at Hockenheim. I will be in the Netherlands for the 4th of July weekend for a vette cruise. My fastest lap time without the cam was 2.06 minutes at 129KPH..I was smoking all of the oher Z06's last year. A lot has happened since we last talked. I will PM you to catch you up on details.
Take Care,
Nick
_________________
04 LS6 block, random tech high flow cats, Vararam air intake, LAPD carbon fiber power duct, C6 Z06 shifter, RD motorsports crossbar & 5 Point Harness, GM T1 sway bars, 04 Sachs shocks, Movit brakes, carbon fiber high rise hood, magnason blower
|
|
| Top |
|
|
Hawk
|
Post subject: Posted: Wed Jun 30, 2004 9:23 am |
|
Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
|
|
Nick just changed springs they have dual patriot springs that would work with your cam
|
|
| Top |
|
|
AutobahnZ06GT
|
Post subject: Posted: Wed Jun 30, 2004 5:51 pm |
|
Joined: Fri Apr 04, 2003 6:59 pm
Posts: 118
Location: Heidelberg
|
Bruce,
Where did you get the springs from? I decided to go with a more mild lift cam to help in my endurance racing as opposed to the high lifts because of spring problems that may occur. When are you going to bitburg again. Do you know how to raise the idle of these cars? I am going next week to get a dyno tune in Switzerland before our big race at Hockenheim, we are doing a vette / Viper shootout at Hockenheim on 10 July. Can't wait.
This is the link to the race club that is sponsoring it: http://www.scci.ch
Do you know anyone that wants my old Katech cam?
Talk with you later
_________________
04 LS6 block, random tech high flow cats, Vararam air intake, LAPD carbon fiber power duct, C6 Z06 shifter, RD motorsports crossbar & 5 Point Harness, GM T1 sway bars, 04 Sachs shocks, Movit brakes, carbon fiber high rise hood, magnason blower
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Thu Jul 01, 2004 4:02 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 8 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
