|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 7 posts ] |
|
Author |
Message |
98 T/A raptor
|
Post subject: Need some help. Posted: Mon Apr 16, 2007 1:23 pm |
|
Joined: Tue Aug 17, 2004 11:24 am Posts: 501 Location: sembach germeny
|
This is where I am stuck I still have one broke bolt in the block and I got it part of the way out but my drill was hitting the side of the wheel well so I couldn’t get it the rest of the way out(using left handed drill bits). So I am asking if anyone has any ideas or anything that could get it out. It is close so it shouldn’t take much to get it out. In the bottom pic you can see the broke bolt on the left and the one on the right is just sitting in the hole so you can see that it isn’t fare from coming out.
Any help would be great.
Attachments: |
DSC00304.JPG [ 43.67 KiB | Viewed 3495 times ]
|
DSC00307.JPG [ 78.36 KiB | Viewed 3490 times ]
|
_________________ 98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
Top |
|
Roy
|
Post subject: Posted: Mon Apr 16, 2007 1:40 pm |
|
Joined: Sun May 27, 2001 2:52 pm Posts: 5556 Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
Top |
|
98 T/A raptor
|
Post subject: Posted: Mon Apr 16, 2007 1:59 pm |
|
Joined: Tue Aug 17, 2004 11:24 am Posts: 501 Location: sembach germeny
|
No I cant find one.
_________________ 98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
Top |
|
NXZ28
|
Post subject: Posted: Mon Apr 16, 2007 4:27 pm |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
I agree with Roy. You have to get the angle drill in there. Also, see if you can find a reverse drill bit. That is about all the options you have unless you want to pull the motor. Good luck.
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
98 T/A raptor
|
Post subject: Posted: Tue Apr 17, 2007 1:26 pm |
|
Joined: Tue Aug 17, 2004 11:24 am Posts: 501 Location: sembach germeny
|
do you know where I could get one around hear or use one? It would have to be electric or cordless.
_________________ 98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
Top |
|
NXZ28
|
Post subject: Posted: Tue Apr 17, 2007 5:20 pm |
|
Joined: Wed May 05, 2004 7:13 am Posts: 706 Location: Vilseck
|
OBI has them if you want to buy one. The Bamberg Auto Skills has one also. I am sure your local Auto Skills should have one also.
_________________ 2002 Camaro Z28 416 Stroker AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
Top |
|
Garry
|
Post subject: Posted: Tue Apr 17, 2007 5:57 pm |
|
Joined: Sat May 26, 2001 9:59 pm Posts: 7823 Location: Bad Hersfeld, Germany
|
Good luck finally getting it out!!!
_________________ Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you." "Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
Top |
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
| |