F-Body Europe


It is currently Sun Jun 29, 2025 12:27 am

All times are UTC + 1 hour





Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: I figured I would post this video
PostPosted: Fri Feb 21, 2003 8:53 pm 
Offline
No Life
User avatar
 Profile

Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
We took this video a week ago at my house after myself and John finished up the final touches. It seems to have a small problem with Ideling. The car idles fine but the PCM keeps trying to adjust the TPS and it kills it at 600rmp. As you all probably already guessed the PCM will be on it's way back to the states to get a new program. I also need to order a new set of O2's and install the suspension. I figured some of you would like to see this so here it is. You can see and listen but i'm still not telling the secrets:) I hope this works I seem to have lack of knowledge when it comes to computers.

fbodyeurope.org/gallery/12_MVC-002V.MPG


Top
 

 Post subject:
PostPosted: Sat Feb 22, 2003 9:01 am 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
http://www.fbodyeurope.org/gallery/12_MVC-002V.MPG

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Sat Feb 22, 2003 9:03 am 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Sounds Like it has some authority behind it now.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Sat Feb 22, 2003 1:19 pm 
Offline
Site Admin
User avatar
 Profile

Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
sounds good have ya skull drug John yet? LOL


Top
 

 Post subject:
PostPosted: Sat Feb 22, 2003 11:16 pm 
Offline
Senior Member
 Profile

Joined: Tue Jul 03, 2001 10:05 pm
Posts: 428
Location: N.C.
So what are you figuring to run in the 1/4? Car has a real nice lope to her. And roy we seen Mr Woods today and we pick up the Iroc this week, Should be a mean bitch when we put it back together. Should be around 450 at the wheels.

_________________
many mods,
Image


Top
 

 Post subject:
PostPosted: Sat Feb 22, 2003 11:19 pm 
Offline
Senior Member
 Profile

Joined: Tue Jul 03, 2001 10:05 pm
Posts: 428
Location: N.C.
I just picked up a 408(400 small block bored 40 over) small block and I am considering building it and putiing it in the Camaro.

_________________
many mods,
Image


Top
 

 Post subject: ???
PostPosted: Sun Feb 23, 2003 12:32 am 
Offline
Senior Member
User avatar
 WWW  Profile

Joined: Sat May 26, 2001 11:06 pm
Posts: 285
Location: San Antonio, Tejas...formerly located at Kapaun Air Station
Mike,

I thought you sold the Camaro and bought a Mustang???
BTW, I put E7 on. Stop by for a beer...

_________________
Barry

77 Trans Am
78 Camaro
81 Corvette
86 Trans Am WS6
2001 Trans Am WS6
2010 H-D Softail Custom
2011 Charger R/T
2018 Ram Power Wagon

Once I thought I was wrong...but I was mistaken.


Top
 

 Post subject:
PostPosted: Mon Feb 24, 2003 10:26 pm 
Offline
Senior Member
 Profile

Joined: Tue Jul 03, 2001 10:05 pm
Posts: 428
Location: N.C.
Nope I got the Camaro and a stang

_________________
many mods,
Image


Top
 

 Post subject:
PostPosted: Mon Feb 24, 2003 10:33 pm 
Offline
Headin' for a divorce
User avatar
 Profile

Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
Mike
You will have fun with that old Iroc car . That car has two accelerators on. The second one is the brake pedal. Those 3rd gen brakes are smallest and crappiest I have ever seen ona car of that weight. It definitely needs a movit upgrade.

_________________
Roy
My vids on Youtube
My vids on Streetfire


Top
 

 Post subject:
PostPosted: Wed Feb 26, 2003 8:15 am 
Offline
No Life
User avatar
 Profile

Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
Yeah I think it has a little grape now but not much :) I don't think I'll be able to skull drag john how did I know bruce would ask somthing like that. I'm almost posotive he has to much done to his car for me to mess with. The pcm will be on it's way back to the states today to get reprogrammed. I'm hoping it'll be back in the car in three weeks if all goes well.


Top
 

 Post subject:
PostPosted: Wed Feb 26, 2003 8:31 am 
Offline
No Life
User avatar
 ICQ  Profile

Joined: Mon May 28, 2001 7:29 pm
Posts: 1175
Location: fairfield, CA
Good luck to ya Ryan. I think it will go well. Who's doing your program?

_________________
Dave Brooks
Image


Top
 

 Post subject:
PostPosted: Wed Sep 03, 2003 11:05 pm 
Offline
No Life
User avatar
 Profile

Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
just pulling this back off the dead list so my wife can show someone. I will admit after not seeing a real car for this long I can't wait to drive her again.


Top
 

 Post subject:
PostPosted: Fri Sep 05, 2003 6:31 am 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
I'm sure Dave is happy that it is going so well!!

BTW, sounds really mean! It always sounded like it had authority to me, but now it will definitely perform! ;)

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Fri Sep 05, 2003 10:34 pm 
Offline
No Life
User avatar
 Profile

Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
Out of me and dave one of us would have gotten it in the rear. I guess tony should have had his story straight when he said oh of course it's your engine, and it actually was my engine he was just trying to put it in someone elses car.

The car definatly has alot more lobe now than when that video was takin. I'm still working out a few bugs but there small. As far as authourity goes I spun about a 1/4 mile while babying the gas and didn't even realize it. When you shift from 1-2 or 2-3 you can't slam the pedal to the floor because it'll roast um. I need more suspension now. :) Jack are you still in germany if you are John and I are going Karting in a few days when I get back


Top
 

 Post subject:
PostPosted: Tue Sep 09, 2003 8:25 am 
Offline
Poster in Chief
User avatar
 WWW  Profile

Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
I would like to go Ryan, just don't crash into me again when I'm lapping YOUR ASS!!!! :p

_________________
Image
http://www.myspace.com/jackster31b


Top
 

 Post subject:
PostPosted: Wed Sep 10, 2003 2:42 pm 
Offline
No Life
User avatar
 Profile

Joined: Tue May 29, 2001 10:04 am
Posts: 1280
Location: FT Drum Ny
Hey we went last night not even 5 hrs home and I was kicking ass on the track. I will give john this he was racing with a flat tire, but I still just about lapped him:) we were planning on going this weekend let one of us know if your game. I wouldn't mind whooooping your ass to:) Plus we raced before and you drive like my grandmother


Top
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC + 1 hour



Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits