 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 8 posts ] |
|
| Author |
Message |
|
Rampage
|
Post subject: Good News - Bad News  Posted: Thu Jul 24, 2003 3:49 pm |
|
Joined: Tue Oct 02, 2001 12:56 am
Posts: 618
Location: Vilnius/ Munich / Dubai
|
 Good news:
As of today, the 24th of July my company has signed a letter of agreement with one of the biggest distributors for spare and replacement parts in Germany.
For all FBODY-Europe members there will be large savings on every part you need. I am talking about discounts of up to 60% on GM/Opel prices.
Might be interesting for you army guys, too, as deilvery time is about 72hrs only and there is only a little freight charge involved.
Terms: COD (Cash on delivery) for german adresses, PIA (payment in advance) or if UPS will deliver on post COD.
URL: http://www.redline-racing.de (under construction)
Mail: request@redline-racing.de (include, vehicle type, hp etc.) available
 Bad news
Sold the Camaro yesterday, so i need to change the signature. sob
_________________
~ Memories are the only paradise where you can NOT get kicked out ~
Well, I ran out of F-Bodies - till 2010 - if there still is GM
Got boost?
|
|
| Top |
|
|
JackZ28
|
Post subject: Posted: Thu Jul 24, 2003 8:58 pm |
|
Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
|
|
| Top |
|
|
BenZ28
|
Post subject: Posted: Fri Jul 25, 2003 9:39 am |
|
Joined: Mon Sep 10, 2001 3:53 pm
Posts: 2485
Location: Mainz, Germany
|
That's really cool. 
And what are you going to buy as a replacement for the Camaro? A WS6 as you said before?
Ben
_________________
1999 Camaro Z28, black, T-Tops, M6
|
|
| Top |
|
|
Rampage
|
Post subject: Replacement.... Posted: Fri Jul 25, 2003 12:12 pm |
|
Joined: Tue Oct 02, 2001 12:56 am
Posts: 618
Location: Vilnius/ Munich / Dubai
|
The replacement ist still a secret, but it will be a big surprise. Regarding the WS6, as of now i´m a bit low on cash for a € 20.000+ car.
After all my collection is about to grow further (and older )
BTW: 183 hp from a 2.3 is quite good for a daily driver. And it saves gas.
JACK: Regarding the hood, i don´t know if body parts are available, but i´ll check it out. Or do you want a fiberglass one?
Da R@M and only
_________________
~ Memories are the only paradise where you can NOT get kicked out ~
Well, I ran out of F-Bodies - till 2010 - if there still is GM
Got boost?
|
|
| Top |
|
|
JackZ28
|
Post subject: Posted: Fri Jul 25, 2003 12:50 pm |
|
Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
|
|
| Top |
|
|
RT1
|
Post subject: Posted: Fri Jul 25, 2003 4:05 pm |
|
Joined: Mon May 28, 2001 7:46 pm
Posts: 1091
Location: El Paso, TX
|
|
That is one clean engine for a 1990. Hope you get a replacement soon.
Rob
_________________
RT1 - 
|
|
| Top |
|
|
Rampage
|
Post subject: Clean engine... Posted: Fri Jul 25, 2003 4:17 pm |
|
Joined: Tue Oct 02, 2001 12:56 am
Posts: 618
Location: Vilnius/ Munich / Dubai
|
|
RT1:
For sure.
Been garaged for 8 years and has only 32k miles on it.
JACKZ28:
Fiberglass hoods start at around €400, handlaid. would recommend buying it stateside though. Better quality. I´m trying to set up connections to Harwood for a german distribution, too.
All parts come directly from the vendor, which is in Holland.
They deliver to me and shipment is forwarded from my adress, eg i just rip the deilvery label off, take the bill out and put mine in.
Simple, huh?
_________________
~ Memories are the only paradise where you can NOT get kicked out ~
Well, I ran out of F-Bodies - till 2010 - if there still is GM
Got boost?
|
|
| Top |
|
|
zcam94
|
Post subject: Posted: Fri Jul 25, 2003 9:13 pm |
|
Joined: Sun Jun 24, 2001 1:32 am
Posts: 324
Location: Giebelstadt, Germany
|
|
To give you heads up on the harwoods: Buying them state side and shipping them to Germany is somewhat expensive. It costed me $300 just to get it to Frankfurt which I had to go to Fedex at the airport, clear customs, then I got to bring the hood home.
_________________
Stock Throttle Body bored 52mm, Modified airbox, desreened MAF,2800 Vigilante Convertor, Vortex Aluminum elbow, Grant D-Shaped Steering Wheel, Hooker Cat-back. Parts wating: cold air induction w/K&N
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 25 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
