F-Body Europe

this is just a heads up. I dont really have a list worked up, but I'm gonna sell off all my entry level stuff. We are going raceing boys and the stuff thats not gonna get it done has to go.

Some items to keep in mind

G-trac torque arm
TNT F1 wet kit (complete)
Hotchkis f/r sway bars
Pro Magnum 1.6 RR
Hotchkis strut tower
LT4 Heads with 7/16 studs
Eibach drag springs w/air bag
LT4 Intake gasket matched
Hal f/r shocks
1LE alum drive shaft
MSD 6AL w/coil
TA diff cover
MSD 6BTM
Motive 4.10 gears w/kit
MSD digital 6
Wolfe 6pt mild steel bolt in
Accel 300+ w/coil
Enkie Wheels X4
Crane HI 6R w/coil
Cloyes double roller
BBK 52mm Tbody
Cloyes single roller
ATI SFI Damper w/hub
MSD inline pump
FLP Long tubes w/y and cats
Hotchkis LCA's
Weld in cut out
Weld in LCA mounts

Stock items:

complete HVAC
Air Pump
ABS Controller
Salad shooters x4
drivers/passenger air bags


I'm sure I have more, and alot of it is avail now or in the very near future. If you hear someone needing things like this give me a shout at robert_hoover0@yahoo.com

Hi Rob,

you got mail
-Alex

How much you want for the Hals w/ Eibachs?

here are some pics I took of the stuff that is available now, with the exception of the shocks and sway bars if you wanted the set. Not that it would be impossible, but it would require me to source some stock pieces to take their place.

Eagle eyes will notice one of the black things not on one of the shocks. I have it, it just rolled behind my shelf and I didnt fill like digging it out. The springs havent been installed, nor have these shocks.



The LT4 cover doesnt go with it, but everything else does



I forgot to mention the march under drive, GMS MAF and the MAF ends, 24# SVO's, and the dynobat bracket.



The 1LE bellows has a NX shark nozzle in it, but I have a IAT that will go back in its place. That is the Accel 300+ w/coil in the box





Everyone knows these wheels, but here is a couple pics. Dont try to buy them new, they were discontinued years ago.





and this is what the car looks like with them

So back to my question- how much do you want for the shocks and springs?

I love the wheels, how much?

125 for the springs.

The shocks I have to wait on, I think they have sold already.

depends on if you want the thin walled socket that comes with them so you can get them on an off.

as they sit, with everything except the air in the tires 1200. If you dont want the tires, 1000 plus whatever it costs to unmount them (no more than 50)

I'll take the springs. I shouldn't have gotten rid of mine. What was I thinking? Also, how much for the sway bars and STB? How much for all 3? Oh and if the sale for the shocks falls through, I want those too!

EDIT: Do you take Paypal?

Robh are you crazy selling those rims? How much for the pro mags and the valve covers?

Is the Hypertech programmer on that picture also for sale ?

I'm gonna do a weanie thing and tell you 325 for the front and rear sway bars/endlinks, dependant on how much the salvage yard will sell me a stock rear bar. If they give me some bs about 100 bux then I dont have a rear bar for sale. I'm sure you know, but incase you dont the front bar is 1 7/16 hollow and the rear is 1" solid. If you dont want them, when I do get a replacement bar (dont know when) the price will drop. Just hedgeing against the temporary replacement.

The strut brace I wont sell to you because it wont fit . On second thought sure, I'll sell it to you I'm asking 1 bill.

IROC yes the programer is for sale. I may have the book laying around? (have to look) but it is step by step on screen. So programmer and cable, for a ->OBD1<- F body 125.


John - The pro mags are currently activating my valves so they are on the future avail list, If you interested in the valve covers I'll let you get them on the serious cheap, but they WILL NOT clear pro mags. (I havent tried them with any other RR, they may fit over other 1.6's, but the pro mags are a no-go.) I dont want to further your frustrations with the aftermarket

As far as the wheels, it hurts man, bad, but I got to get off the fence. I'm gonna make this thing run and competition parts cost real money so the bling has to go.


Guys, nothing is set in stone. I'm putting prices up that have been bounced off new vs. ebay vs. my honest opinion of the condition. If you think I'm way off, let me know, and we can discuss it.

Rob, would I have to reset the programmer in any way or would it work without problems on a '94 (OBD1) ?

Well I'll just take the VC's I'm sure they'll fit me' cranes.

what size are the tires if you dont mind me asking?

Got any pics of the cage in the car? May want that too.

Ok, then I just want the springs.

Rob you gonna switch to a fuel cell? I want your fuel tank if you do! Can't get no one back in the states to hook me up w/ shipping. I've seen rears ship for less. Talkin 400 bucks to ship a tank?! FT!

IROC It is only good on a 94 or 95 F body. You would be fine.

Johnnyv89 the wheels are 17X9.5 and the tires are 275/40/17's

Jack no problemo, just give me a good address and they will go out tomarrow.

John I'll get a pic of just the valve covers tomarrow so you can see them. I cant find a link anymore, but I bought them from Scoggin's. They are the billet aluminum ones. I'll throw in the screw-in vent and a push on oil cap (if I can find the cap ).

The cage would be better suited for someone in the states. They sent it truck freight because of the main hoop. I'm not sure the post office will accept the size.

No fuel cell yet, I bought a 3 galfuel cell to use as a aftercooler resevoir.

the stuff I am asking about first off i need to know if it will work in a 3rd gen. more importantly a an 87 iroc that will have a t-56 in it

I would like to see the g-trac torque arm
I know what the driveshaft looks like so i just need to be reassured that it would fit in a 3rd gen with a t56
also interested in the bolt in cage. and the weld in lca mounts.

how much do you want for this stuff. I am also not in any hurry I have a buddie in Lawton so i would probably see if he could get the stuff for now or something