 |
View unanswered posts | View active topics
| Author |
Message |
|
Hawk
|
Post subject:  Posted: Sat Sep 15, 2001 11:40 am |
|
Joined: Tue Jun 26, 2001 4:25 pm
Posts: 4288
Location: Vilseck
|
|
salveston get with me if you want to pump up your car. How fast do you want to go? $1500 will get you low 13s with what you got.
|
|
| Top |
|
|
Randy92Z
|
Post subject: Posted: Sat Sep 15, 2001 9:01 pm |
|
Joined: Sun May 27, 2001 9:24 am
Posts: 151
Location: Giebelstadt, Germany
|
|
An E-7 in Illershiem, he has a 97 (I think) Z28 with a boken con rod. He is suppost to be picking it up this weekend.
_________________
Convertible W/L98, TPIS Mini-Ram, TPIS ZZ9 cam, Trick Flow 23* heads, Edelbrock cermaic coated TES, Dynomax high flow cat, Flowmaster Force II exhaust, Fastchips custom chip, March underdrive pulleys, Lakewood LCA's and adj. panhard rod, A/C delete, Smog pump delete, 3.42 rear gears and NOS!!
|
|
| Top |
|
|
Randy92Z
|
Post subject: Posted: Mon Sep 17, 2001 5:40 am |
|
Joined: Sun May 27, 2001 9:24 am
Posts: 151
Location: Giebelstadt, Germany
|
|
Well he decided not to get it. The engine is now available again. Hey Jaz, does your friend need a engine??
_________________
Convertible W/L98, TPIS Mini-Ram, TPIS ZZ9 cam, Trick Flow 23* heads, Edelbrock cermaic coated TES, Dynomax high flow cat, Flowmaster Force II exhaust, Fastchips custom chip, March underdrive pulleys, Lakewood LCA's and adj. panhard rod, A/C delete, Smog pump delete, 3.42 rear gears and NOS!!
|
|
| Top |
|
|
RT1
|
Post subject: Posted: Mon Sep 17, 2001 9:58 am |
|
Joined: Mon May 28, 2001 7:46 pm
Posts: 1091
Location: El Paso, TX
|
|
Randy... You help me blow my engine and I'll buy it. I need to not f up the tranny right? You got that 6 speed off of that right? I will have that extra $100 coming from Bruce, anyway. But I haven't even driven my car since Tuesday night, can't get off post. I go and sit in it and start her everyday though. I wanna drive!
RT1
Last edited by RT1 on Mon Sep 17, 2001 12:48 pm, edited 1 time in total.
|
|
| Top |
|
|
JazWhelan
|
Post subject: Posted: Mon Sep 17, 2001 6:55 pm |
|
Joined: Wed Jul 18, 2001 7:02 pm
Posts: 168
Location: Spangdahlem GE
|
|
Sounds good can I come down this weekend to check it out I need to talk to tony about what adapters we will need. Give me your # so we can hook up. JAZ
_________________
91 Camaro "Total Package" Mod's car cover and jack stands
|
|
| Top |
|
|
Sergio-Casino
|
Post subject: Posted: Mon Sep 17, 2001 9:28 pm |
|
Joined: Mon Jun 18, 2001 8:49 am
Posts: 334
Location: Den Helder, Holland
|
|
RT1, in order to make it all work you need much more than the engine itself.
Since it was a 6 speed you need either a new PCM or severe reprogramming, also a new wiring harness is needed plus all the other goodies like the good ol' Crossmember to start with, radiator, dual fans, hoses, fuel lines, powersteering resevoir, etc etc. Also do keep in mind that your 40L60E does not bolt on to the Lt-1 just like that, a new belhousing is needed.
Believe me, i've done the math and know exactly what's needed.
_________________
Sergio
95 'Money Pit' Camaro 3.4 M5 .. Modded LT-1 this summer (2005) !!
|
|
| Top |
|
|
RT1
|
Post subject: Posted: Tue Sep 18, 2001 12:44 pm |
|
Joined: Mon May 28, 2001 7:46 pm
Posts: 1091
Location: El Paso, TX
|
|
So you are saying that I could keep the same gas tank, and the body, right? Thanks, I am glad you have done your homework on this. You rock dude.
RT1
|
|
| Top |
|
|
HatersNightmare99
|
Post subject: Posted: Tue Sep 18, 2001 2:47 pm |
|
Joined: Sun May 27, 2001 2:46 pm
Posts: 128
Location: Ramstein AB, Germany
|
|
on most of your hoses you cut and adapt them to fit..nad the radiator will or should work off a thirdgen tpi along with the fuel pump... have any more ? go to thirdgen.org and go to motor swap section
|
|
| Top |
|
|
Randy92Z
|
Post subject: Posted: Tue Sep 18, 2001 9:28 pm |
|
Joined: Sun May 27, 2001 9:24 am
Posts: 151
Location: Giebelstadt, Germany
|
|
Jaz, or anyone, A German guy just waved the cash in front of me today and wants it now. If any of you are serious about this motor you must get back to me ASAP. I would rather help out FBE, since you are my people's!! Otherwise consider this engine gone.
_________________
Convertible W/L98, TPIS Mini-Ram, TPIS ZZ9 cam, Trick Flow 23* heads, Edelbrock cermaic coated TES, Dynomax high flow cat, Flowmaster Force II exhaust, Fastchips custom chip, March underdrive pulleys, Lakewood LCA's and adj. panhard rod, A/C delete, Smog pump delete, 3.42 rear gears and NOS!!
|
|
| Top |
|
|
Randy92Z
|
Post subject: Posted: Thu Sep 20, 2001 8:16 pm |
|
Joined: Sun May 27, 2001 9:24 am
Posts: 151
Location: Giebelstadt, Germany
|
|
The engine has been sold.
_________________
Convertible W/L98, TPIS Mini-Ram, TPIS ZZ9 cam, Trick Flow 23* heads, Edelbrock cermaic coated TES, Dynomax high flow cat, Flowmaster Force II exhaust, Fastchips custom chip, March underdrive pulleys, Lakewood LCA's and adj. panhard rod, A/C delete, Smog pump delete, 3.42 rear gears and NOS!!
|
|
| Top |
|
|
JackZ28
|
Post subject: Posted: Thu Sep 20, 2001 9:28 pm |
|
Joined: Mon May 28, 2001 6:03 pm
Posts: 8686
Location: Houston, TX
|
|
| Top |
|
|
Jr
|
Post subject: Posted: Tue Sep 25, 2001 2:38 pm |
|
Joined: Fri Jul 06, 2001 1:14 pm
Posts: 1288
Location: North Carolina
|
|
Geez about time man!
_________________
Scott.. 96' Z28 With to many Mod's to list..
2002 Camaro SS with T-Tops and 6spd.
|
|
| Top |
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
