 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 13 posts ] |
|
| Author |
Message |
|
TurboManiacal
|
Post subject: Want to see what is going to get me divorced?  Posted: Sun Oct 23, 2005 6:28 pm |
|
Joined: Tue Sep 21, 2004 12:43 pm
Posts: 963
Location: Mannheim
|
Quote: Makes 500hp and 550ft/lbs at the wheels at 23psi. This motor has gone as fast as 10.2@132. It features 4 bolt mains, extensive oiling modifications, high volume/pressure oil pump, SRP pistons, Eagle rods, speedpro rings, double roller timing set, comp 415 cam, one piece cam bearings, vortec raised runner heads, 2.02 and 1.60 valves, isky springs, locks and retainers, comp 1.6 ratio roller tip rockers, custom welded and milled lower intake manifold to fit the vortec heads, extensive portwork in the heads and intake, equlaized chambers, and flow bench matched air delivery within 1% from cylinder to cylinder. ARP hardware throughout. this motor is ready to rock, and we have a chip for a plug and play setup using the stock ECU. enjoy the pics.            That's my actual motor being built for the Syclone.
Turbo that will be used:
_________________
2008 BMW 335xi
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Sun Oct 23, 2005 6:43 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
Nice! So how long till it gets here? In time for next race season I hope? 
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
2slow
|
Post subject: Posted: Sun Oct 23, 2005 6:51 pm |
|
Joined: Sun Jul 04, 2004 11:34 pm
Posts: 653
Location: Wolfsburg, Germany
|
Nice motor.
What's that ugly white thing behind the motor (on the 1st pic) 
_________________
Life served me a lemon.... I made Lemonade out of it!
|
|
| Top |
|
|
TurboManiacal
|
Post subject: Posted: Sun Oct 23, 2005 7:05 pm |
|
Joined: Tue Sep 21, 2004 12:43 pm
Posts: 963
Location: Mannheim
|
2slow wrote: Nice motor. What's that ugly white thing behind the motor (on the 1st pic) Typhoon. 
_________________
2008 BMW 335xi
|
|
| Top |
|
|
TurboManiacal
|
Post subject: Posted: Sun Oct 23, 2005 7:06 pm |
|
Joined: Tue Sep 21, 2004 12:43 pm
Posts: 963
Location: Mannheim
|
Garry wrote: Nice! So how long till it gets here? In time for next race season I hope? I sure hope so...but every time I see my truck, I add things I need to do in my project book. So we'll see.
_________________
2008 BMW 335xi
|
|
| Top |
|
|
85z28
|
Post subject: Posted: Sun Oct 23, 2005 10:07 pm |
|
Joined: Sun Jan 11, 2004 4:34 pm
Posts: 548
Location: Atlanta, Ga
|
|
just 500 and 550 @ 23 psi.
you gonna run slicks on all four corners.
I love to see those trucks come off the line.
_________________
WHY DON'T YOU GO OUTSIDE AND PLAY HIDE AND GO F*CK YOURSELF
|
|
| Top |
|
|
TurboManiacal
|
Post subject: Posted: Sun Oct 23, 2005 11:38 pm |
|
Joined: Tue Sep 21, 2004 12:43 pm
Posts: 963
Location: Mannheim
|
85z28 wrote: you gonna run slicks on all four corners.
Shouldn't need to. We'll see.
_________________
2008 BMW 335xi
|
|
| Top |
|
|
slickmetal.com
|
Post subject: Posted: Mon Oct 24, 2005 9:49 am |
|
Joined: Tue Jun 08, 2004 10:31 am
Posts: 490
Location: D-M AFB, AZ formally Bitburg 2002-2006
|
SyGoat wrote: 85z28 wrote: you gonna run slicks on all four corners.
Shouldn't need to. We'll see. Awesome. Wish I had my GN to line up with you, but it would only be a 3.8
hope the AR 70 is nice...think the GN is running a 60, have to go check.
Putting a T4 on the Firebird this winter, I hope.
http://forums.mightymustangs.net/index. ... &album=310
theres some pics for ya
_________________
2011 Chevy Camaro SS/RS
Sold my Bird to ChrisV6!
1998 Skyline GTS - SOLD!
1986 Buick Grand National -SOLD!
|
|
| Top |
|
|
jeejee
|
Post subject: Posted: Mon Oct 24, 2005 10:06 am |
|
Joined: Fri Sep 09, 2005 10:02 am
Posts: 658
Location: the Netherlands
|
what crank are you running ?
as i was told the standard cast crank dooesn't hold up a lot of boost / horsepower 
_________________
 
if you're not breaking parts , you are not making enough power
When in doubt, increase boost !
|
|
| Top |
|
|
jinstall
|
Post subject: Posted: Mon Oct 24, 2005 11:53 am |
|
Joined: Tue Jul 12, 2005 5:08 pm
Posts: 942
Location: Fort Bliss, Texas
|
Yeah Yeah looks like another Garage Queen if you sak me. Gte that bitch together and lets see how it does  
_________________
2001 Ford Focus sleeping in Germany
04 Focus ST170 Clone in USA
2010 Renault Clio 1.2 16V in Germany
2013 Focus ST250 in the USA
1st car 77 Camaro Type Lt 5.0 auto
|
|
| Top |
|
|
Firechicken
|
Post subject: Posted: Tue Oct 25, 2005 6:32 am |
|
Joined: Fri Apr 26, 2002 7:17 pm
Posts: 1201
Location: Winder, GA
|
|
Ryan will that be 500hp on the ground or at the crank?? Looks exspensive!!
_________________
2004 King of The Hill
2005 King of The Hill
Retired US Army
[img]http://www.fbodyeurope.org/gallery/110_Image098.jpg[/img
|
|
| Top |
|
|
TurboManiacal
|
Post subject: Posted: Tue Oct 25, 2005 6:17 pm |
|
Joined: Tue Sep 21, 2004 12:43 pm
Posts: 963
Location: Mannheim
|
jeejee wrote: what crank are you running ? as i was told the standard cast crank dooesn't hold up a lot of boost / horsepower It'll be a stock crank for a SyTy. Notice that the mains are getting upgraded to 4 bolt though.
_________________
2008 BMW 335xi
|
|
| Top |
|
|
TurboManiacal
|
Post subject: Posted: Tue Oct 25, 2005 6:37 pm |
|
Joined: Tue Sep 21, 2004 12:43 pm
Posts: 963
Location: Mannheim
|
Firechicken wrote: Ryan will that be 500hp on the ground or at the crank?? Looks exspensive!!
The guy I'm building after (following his mod list) did 500 WHP @ 25psi. He's bumped up to 27 w/ 40 shot (turbo spool) should be around 550 WHP now.
I will probably never run it that high on boost while I'm here...well maybe for one run ...enough to get Garry mad at me.
_________________
2008 BMW 335xi
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 13 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 17 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
