 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 15 posts ] |
|
| Author |
Message |
|
98 T/A raptor
|
Post subject: C5 headers  Posted: Tue Jul 25, 2006 12:37 pm |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
My friend has some c5 long tube headers from breathless performance new they are $1450. They are in good condition, If someone is intrested let me know I am sure I can get them for about 200 - 300 bucks. Hear are pics from there website.
| Attachments: |
WebHeaders1.jpg [ 46.54 KiB | Viewed 5347 times ]
|
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Tue Jul 25, 2006 1:14 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
|
Do they fit in an F-Body? Also, I noticed they seem to have different version for the C5, too (at least they have the "specify year" on the webpage)
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Tue Jul 25, 2006 1:22 pm |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
I really doubt they eill fit an f-body as far as year I wouldnt know.
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
Jens
|
Post subject: Posted: Tue Jul 25, 2006 3:09 pm |
|
Joined: Tue Dec 09, 2003 7:13 pm
Posts: 449
Location: Lohne, Germany between Bremen and Osnabrück
|
|
the corvette has a complete different exhaust system. I think, they will not fit
_________________
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Tue Jul 25, 2006 5:37 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
|
Most likely would need at least a different Y-pipe ... or better, full dual cat-back ...
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
IROC
|
Post subject: Posted: Tue Jul 25, 2006 7:10 pm |
|
Joined: Sat Aug 04, 2001 12:41 pm
Posts: 570
Location: Nuremberg, Germany
|
|
How good is the condition of the headers ? any damage to the coating ?
Are they the fully welded version or the ones with the removable exhaust pipe ? Do they come with fittings for the O2 sensors and the rest of the emission crap ?
_________________
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Wed Jul 26, 2006 6:48 am |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
The coating is good you can tell they have been used but not rusty. They are the removable kind.
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
IROC
|
Post subject: Posted: Wed Jul 26, 2006 7:28 am |
|
Joined: Sat Aug 04, 2001 12:41 pm
Posts: 570
Location: Nuremberg, Germany
|
98 T/A raptor wrote: The coating is good you can tell they have been used but not rusty. They are the removable kind.
what about the fittings for the emissions equipment ? If they have them I'd want em.... can you find out about it ?
_________________
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Wed Jul 26, 2006 9:13 am |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
I know they have the hookups for the egr I didnt look for the 02's but I am sure they are there. I will see him again on friday I will Look at them then
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Wed Jul 26, 2006 10:50 am |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
Okey they will fit ALL VETTE'S 97 and up
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Thu Jul 27, 2006 6:15 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
Iroc, All I would seriously think about staying away from the Breathless headers. These headers will leak at primaries and at the collectors. Nothing you can do about it short of welding them solid. Just ask abahnZO6 about Breathless. .
_________________
Roy
My vids on Youtube
My vids on Streetfire
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Thu Jul 27, 2006 7:54 am |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
Roy wrote: Iroc, All I would seriously think about staying away from the Breathless headers. These headers will leak at primaries and at the collectors. Nothing you can do about it short of welding them solid. Just ask abahnZO6 about Breathless. .
THat sucks considering how much they cost.
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
Roy
|
Post subject: Posted: Thu Jul 27, 2006 9:24 am |
|
Joined: Sun May 27, 2001 2:52 pm
Posts: 5556
Location: Mehlingen,Rhineland Pfalz, Deutschland
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Thu Jul 27, 2006 9:29 am |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
No he is selling them because he dosent have a vette.
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Wed Aug 02, 2006 9:47 am |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
They are sold.
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 15 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 17 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
