 |
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 9 posts ] |
|
| Author |
Message |
|
NXZ28
|
Post subject: For Sale-Patriot Performance Stage II LS6 heads  Posted: Thu Oct 19, 2006 1:13 pm |
|
Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
|
|
I just had these repaired. I burned an exhaust valve. I ordered a replacement valve from Patriot. It was replaced at a reputable machine shop here in Bamberg. The heads are for the center bolt valve cover design. They come with the following:
Fully CNC'd ported
2.05" intake and 1.57' exhaust Stainless Steel valves
64cc combustion chambers (Stock Compression ratio)
Patriot Gold dual valve Springs good to .650" lift
7 degree titanium valve locks
These heads are not damaged at all. I only have around 3000 miles on them. I am only selling them because I want a head with a thicker than stock deck to handle the 300 shot of nitrous.
Price is $900 U.S. dollars.
_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
| Top |
|
|
98 T/A raptor
|
Post subject: Posted: Thu Oct 19, 2006 1:19 pm |
|
Joined: Tue Aug 17, 2004 11:24 am
Posts: 501
Location: sembach germeny
|
|
UH Take payment's
_________________
98 Trans Am
3500 Stall, lid bellows, headers off road y pipe, flowmaster cat back, 150 shot dual stage nitrous express, Ls1 Speed tunning (Georgia)
2000 WS6 RIP
|
|
| Top |
|
|
NXZ28
|
Post subject: Posted: Thu Oct 19, 2006 1:32 pm |
|
Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
|
|
pm sent
_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
| Top |
|
|
NXZ28
|
Post subject: Posted: Thu Oct 19, 2006 1:40 pm |
|
Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
|
|
Pending sale to Raptor.
6 minutes. Not bad.
_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Thu Oct 19, 2006 1:48 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
I think I need to put this area under Moderator control ... postings to be released by a moderator. Like e.g. ME  (OK, not planing on putting on heads the first time around, but ...) 
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
NXZ28
|
Post subject: Posted: Thu Oct 19, 2006 1:51 pm |
|
Joined: Wed May 05, 2004 7:13 am
Posts: 706
Location: Vilseck
|
|
Sorry Garry. I didn't think you were in the market for heads. I will let you know if anything changes but I doubt it will.
_________________
2002 Camaro Z28
416 Stroker
AFR, Comp Cam Solid Roller, Currie 9", Super Victor, 4500 TB, TH350, T&D Rockers, 50# Injectors
|
|
| Top |
|
|
TurboManiacal
|
Post subject: Posted: Thu Oct 19, 2006 4:46 pm |
|
Joined: Tue Sep 21, 2004 12:43 pm
Posts: 963
Location: Mannheim
|
|
Hmmm....dammit
_________________
2008 BMW 335xi
|
|
| Top |
|
|
Garry
|
Post subject: Posted: Thu Oct 19, 2006 5:28 pm |
|
Joined: Sat May 26, 2001 9:59 pm
Posts: 7823
Location: Bad Hersfeld, Germany
|
As I said, not in the market for heads this year ....
_________________
Garry Glendown * '99 Firehawk Convertible
"Horsepower is how fast you hit the wall and torque is how far you take the wall with you."
"Speed doesn't kill - suddenly becoming stationary on the other hand ..."
|
|
| Top |
|
|
LS1
|
Post subject: Posted: Fri Oct 20, 2006 7:55 pm |
|
 |
| Fast Newbie |
|
Joined: Sat Jun 05, 2004 1:39 pm
Posts: 88
Location: Hamburg, Germany/Graz, Austria
|
|
pm sent.
_________________
|
|
| Top |
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
| |
